DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

ZNBG3210 データシートの表示(PDF) - Zetex => Diodes

部品番号
コンポーネント説明
メーカー
ZNBG3210 Datasheet PDF : 16 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
ZNBG3210
ZNBG3211
SYMBOL PARAMETER CONDITIONS
LIMITS
UNITS
TONE DETECTION CHARACTERISTICS
MIN. TYP. MAX.
IB
VOUT
IOUT
Filter Amplifier
Input Bias Current RF1=150k
Output Voltage 5 RF1=150k
Output Current 5 VOUT=1.96V, VFIN=2.1V
GV
Voltage Gain f=22kHz,VIN=1mV
Rejection
fR8
Frequency
V(AC)in=1V p/p sq.w6
VLOV
Output Stage
LOV Volt. Range IL=50mA(LB or HB)
ILOV
VLBL
VLBH
LOV Bias Current
LB Output Low
LB Output High
VLOV=0
VLOV=0 IL=-10µA
VLOV=3V IL=0
VLOV=0 IL=10mA
VLOV=3V IL=50mA
Enabled 6
Enabled 7
Disabled 6
Disabled 7
VHBL
VHBH
HB Output Low
HB Output High
VLOV=0 IL=-10µA
VLOV=3V IL=0
VLOV=0 IL=10mA
VLOV=3V IL=50mA
Disabled 6
Disabled 7
Enabled 6
Enabled 7
POLARITY SWITCH CHARACTERISTICS
0.02 0.07 0.25 µA
1.75 1.95 2.05 V
400 520 650 µA
46
dB
1.0 7.5
kHz
-0.5
VCC-1.8 V
0.02 0.15 1.0 µA
-3.5 -2.75 -2.5 V
-0.01 0
0.01 V
-0.025 0
2.9 3.0
0.025 V
3.1 V
-3.5 -2.75 -2.5 V
-0.01 0
0.01 V
-0.025 0
2.9 3.0
0.025 V
3.1 V
IPOL
Input Current VPOL=25V (Applied via RPOL=10kΩ) 10 20 40 µA
VTPOL
Threshold
Voltage
14
VPOL=25V (Applied via RPOL=10kΩ)
14.75 15.5 V
TSPOL
Switching Speed VPOL=25V (Applied via RPOL=10kΩ)
100 ms
NOTES:
1. The negative bias voltages specified are generated on-chip using an internal oscillator. Two external capacitors, CNB and CSUB, of
47nF are required for this purpose.
2. The characteristics are measured using an external reference resistor RCAL of value 33k wired from pins RCAL to ground.
3. Noise voltage is not measured in production.
4. Noise voltage measurement is made with FETs and gate and drain capacitors in place on all outputs. CG, 4.7nF, are connected between
gate outputs and ground, CD, 10nF, are connected between drain outputs and ground.
5 . These parameters are linearly related to VCC
6. These parameters are measured using Test Circuit 1
7. These parameters are measured using Test Circuit 2
8. The ZNBG32 series will also reject DiSEqCand other common switching bursts.
67-4

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]