EETED2S680HJ データシートの表示（PDF） - Panasonic Corporation
部品番号
コンポーネント説明
メーカー
EETED2S680HJ Datasheet PDF : 4 Pages
| |||
Snap-in Type
Series: ED Type: TS
■ Features
● Endurance : 105 °C 3000 h
● High ripple current capability in high frequency range.
● RoHS directive compliant
Aluminum Electrolytic Capacitors/ ED
■ Specifications
Category Temp. Range
–40 °C to + 105 °C
–25 °C to +105 °C
Rated W.V. Range
200 V.DC to 250 V.DC
400 V.DC to 450 V.DC
Nominal Cap. Range
220 µF to 2200 µF
56 µF to 560 µF
Capacitance Tolerance
±20 % (120 Hz/+20 °C)
DC Leakage Current
3ǰ CV (µA) max. After 5 minutes application of rated working voltage at +20 °C
C : Capacitance (µF) V: W.V. (V.DC)
tan δ
Please see the attached standard products list
Frequency Correction Frequency (Hz)
Factor for Ripple Current Correction Factor
50
60
100
120
500
1 k 10 k to
0.5
0.55
0.68
0.70
0.85
0.90
1.00
After 3000 hours application of DC voltage with specified ripple current (< rated DC working
voltage) at +105 °C±2 °C, the capacitors shall meet the following limits.
Endurance
Capacitance change <±20 % of initial measured value
tan δ
< 200 % of initial specified value
DC leakage current < initial specified value
Shelf Life
After storage for 1000 hours at +105 °C±2 °C within no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance (With voltage treatment)
■ Dimensions in mm (not to scale)
Polarity bar
Sleeve
Vent
(10.0)
2-φ2.0±0.1
10.0±0.1
(mm)
L+2.0 max.
4.0±0.5
Rated voltage etc. indicate to sleeve.
0.8+–00..21
(φD)
Recommended PWB piercing plan
2.0 max. Terminal
(t=0.8)
1.5±0.2
Top of spin
Standard terminal type does not require
terminal trimming process.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Jul. 2008
Share Link: 