G121X1-L01 データシートの表示（PDF） - AZ Displays

部品番号

コンポーネント説明

メーカー

G121X1-L01

TFT LCD Approval Specification

AZ Displays 

Doc No.: 14068025

Issued Date: Nov. 09, 2006

Model No.: G121X1-L01

Approval

The output of the inverter must have symmetrical (negative and positive) voltage waveform and

symmetrical current waveform. (Unsymmetrical ratio is less than 10%) Please do not use the inverter

which has unsymmetrical voltage and unsymmetrical current and spike wave. Lamp frequency may

produce interface with horizontal synchronous frequency and as a result this may cause beat on the

display. Therefore lamp frequency shall be as away possible from the horizontal synchronous

frequency and from its harmonics in order to prevent interference.

Requirements for a system inverter design, which is intended to have a better display performance, a

better power efficiency and a more reliable lamp. It shall help increase the lamp lifetime and reduce its

leakage current.

a. The asymmetry rate of the inverter waveform should be 10% below;

b. The distortion rate of the waveform should be within √2 ± 10%;

c. The ideal sine wave form shall be symmetric in positive and negative polarities.

* Asymmetry rate:

Ip

| I p – I –p | / Irms * 100%

I -p

* Distortion rate

I p (or I –p) / Irms

11 / 26

Version 3.1

Share Link: