G121X1-L01 データシートの表示（PDF） - AZ Displays

部品番号

コンポーネント説明

メーカー

G121X1-L01

TFT LCD Approval Specification

AZ Displays 

Doc No.: 14068025

Issued Date: Nov. 09, 2006

Model No.: G121X1-L01

Approval

2. ABSOLUTE MAXIMUM RATINGS

2.1 ABSOLUTE RATINGS OF ENVIRONMENT

Item

Operating Ambient Temperature

Storage Temperature

Symbol

TOP

TST

Value

Min.

Max.

-30

+70

-40

+80

Unit

Note

ºC (0), (1), (2)

ºC

(0), (1)

Test Item

High Temperature Storage Test

Low Temperature Storage Test

Thermal Shock Storage Test

High Temperature Operation Test

Low Temperature Operation Test

High Temperature & High Humidity

Operation Test

Heat Cycle Operation Test

ESD Test (Operation)

Test Condition

80ºC, 240 hours

-40ºC, 240 hours

-40ºC, 0.5hour←→80℃, 0.5hour; 100cycles, 1hour/cycle

70ºC, 240 hours

-30ºC, 240 hours

60ºC, RH 90%, 240hours

-30ºC, 1hour←→70ºC, 1hour; 50cycles, 4hour/cycle

150pF, 330Ω, 1sec/cycle

Condition 1 : panel contact, ±8KV

Condition 2 : panel non-contact ±15KV

Shock (Non-Operating)

Vibration (Non-Operating)

200G, 2ms, half sine wave, 1 time for ± X, ± Y, ± Z.

1.5G, 10 ~ 300 Hz, 10min/cycle, 3 cycles each X, Y, Z

Note (0) All test conditions are as above table.

Note (1) Temperature and relative humidity range is shown in the figure below.

(a) 90 %RH Max. (Ta ≦ 40 ºC).

(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).

(c) No condensation.

Note

(1) (2)

(2)

(2)(3)

(2)(3)

Note (2) No display malfunctions.

Note (3) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough

so that the module would not be twisted or bent by the fixture.

Note (4) Temperature of panel display surface area should be 80 ºC Max.

6 / 26

Version 3.1

Share Link: