OP265B データシートの表示（PDF） - Optek Technology
部品番号
コンポーネント説明
メーカー
OP265B Datasheet PDF : 4 Pages
| |||
Plastic Infrared Emitting Diode
OP265, OP266 Series
(A, B, C, D, W)
Absolute Maximum Ratings (TA = 25° C unless otherwise noted)
Storage and Operating Temperature Range
Reverse Voltage
Continuous Forward Current
Peak Forward Current (1 µs pulse width, 300 pps)
Lead Soldering Temperature [1/16 inch (1.6 mm) from case for 5 seconds with soldering iron]
Power Dissipation
-40o C to +100o C
2.0 V
50 mA
3.0 A
260° C(1)
100 mW(2)
Notes:
1. RMA flux is recommended. Duration can be extended to 10 second maximum when flow soldering. A maximum of 20 grams force
may be applied to the leads when soldering.
2. Derate linearly at 1.33 mW/° C above 25° C.
3. EE(APT) is a measurement of the average apertured radiant incidence upon a sensing area 0.081” (2.06 mm) in diameter, perpendicular
to and centered on the mechanical axis of the lens and 0.590” (14.99 mm) from the measurement surface. EE(APT) is not necessarily
uniform within the measured area.
Electrical Characteristics (TA = 25° C unless otherwise noted)
SYMBOL
PARAMETER
MIN TYP MAX UNITS
TEST CONDITIONS
Input Diode
EE (APT)
Apertured Radiant Incidence
OP265A, OP266A
OP265B, OP266B
OP265C, OP266C
OP265D, OP266D
Radiant Power Output
PO
OP265, OP266 (A, B, C, D)
OP265W, OP266W
VF Forward Voltage
IR
Reverse Current
λP
Wavelength at Peak Emission
B
Spectral Bandwidth between Half Power
Points
Spectral Shift with Temperature
∆λP /∆T
OP265, OP266 (A, B, C, D)
OP265W, OP266W
Emission Angle at Half Power Points
θHP
OP265, OP266 (A, B, C, D)
OP265W, OP266W
tr
Output Rise Time
tf
Output Fall Time
2.70 -
-
1.65
-
4.70 mW/cm2 IF = 20 mA(3)
0.54 - 3.30
0.54 -
-
-
-
-
1.00 -
-
-
- 1.80
-
- 100
- 890 -
-
80
-
mW IF = 20 mA
V IF = 20 mA
µA VR= 2 V
nm IF = 10 mA
nm IF = 10 mA
- ±0.30 - nm/°C IF = Constant
- ±0.18 -
-
18
- Degree IF = 20 mA
-
90
-
- 500 -
- 250 -
ns
IF(PK)=100 mA, PW=10 µs, D.C.=10.0%
ns
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A 07/06
Page 3 of 4
Share Link: 