L2800L-S08-T データシートの表示（PDF） - Unisonic Technologies

部品番号

コンポーネント説明

メーカー

L2800L-S08-T

SWITCHING REGULATOR CONTROLLER(LOW VOLTAGE)

Unisonic Technologies 

L2800

„ DIAGRAM

LINEAR INTEGRATED CIRCUIT

„ HOW TO SET THE TIME CONSTANT FOR SHORT CIRCUIT DETECTION AND SOFT

START

1. SHORT CIRCUIT PROTECTION

Te error amplifier output (FB pin) is fixed at VOM+ and capacitor CPE starts charging i the switching regulator

output suddenly drops due to load effect. The output pin is set low and the SCP pin stays low when the voltage at

the SCP pin reaches approximately 0.8V.

As the protection circuit operates, by resetting the power supply the circuit will be restored.

•Short circuit detection time

tPE[S]≒0.8*CPE[μF]

2. SOFT START

Once power on, the capacitor CPE which is connected to the SCP pin starts charging.The soft start setting

voltage is compared by the PWM comparator as the voltage’s proportion at the SCP pin with the sawtooth

waveform. The comparison controls the OUT pin’s ON duty,which is causing the soft start operation. During the

time for completion of soft start operation, the SCP pin’s voltage stays low, but the soft start setting voltage stays

high, and the circuit then enters the output short circuit detection wait state.

Soft start time (until the output ON duty reaches approximately 50%)

ts[S]≒0.35*CPE[μF]

UNISONIC TECHNOLOGIES CO., LTD

www.unisonic.com.tw

5 of 7

QW-R103-030,B

Share Link: