LB58E68
Measurement Circuits
The following conditions apply to figure 1.
• Standby mode
• Port S input resistors enable
• I/O ports in output mode, all outputs HIGH
• INT open and internal input transistors enabled
• External pull-down resistor connected to RES.
• Current flow through components connected to LCD
ports is not included.
• fxtal = 32 to 65 kHz
• fcer = 200 kHz to 4 MHz
The flowing conditions apply to figures 2 and 3.
• fxtal = 32 kHz
• C1 = C2 = C3 = 0.1µF
• LCD ports are open.
• fcer = 200 kHz to 4 MHz
Figure 1. Supply leakage measurement
Figure 2. Supply voltage measurement 1
Figure 4. Supply current measurement 1
Notes
1. Ceramic filter oscillator stopped
2. fxtal = 32, 38 or 65kHz
Figure 5. Supply current measurement 2
Figure 3. Output voltage measurement 2
Figure 6. Supply current measurement 3
Note
Crystal oscillator stopped
No.3410–8/16