LM2902DH データシートの表示（PDF） - Philips Electronics
部品番号
コンポーネント説明
メーカー
LM2902DH Datasheet PDF : 12 Pages
| |||
Philips Semiconductors
Low power quad op amps
Product data
LM124/224/324/324A/
SA534/LM2902
DESCRIPTION
The LM124/SA534/LM2902 series consists of four independent,
high-gain, internally frequency-compensated operational amplifiers
designed specifically to operate from a single power supply over a
wide range of voltages.
UNIQUE FEATURES
In the linear mode, the input common-mode voltage range includes
ground and the output voltage can also swing to ground, even
though operated from only a single power supply voltage.
The unity gain crossover frequency and the input bias current are
temperature-compensated.
FEATURES
• Internally frequency-compensated for unity gain
• Large DC voltage gain: 100 dB
• Wide bandwidth (unity gain): 1 MHz (temperature-compensated)
• Wide power supply range Single supply: 3 VDC to 30 VDC or dual
supplies: ±1.5 VDC to ±15 VDC
• Very low supply current drain: essentially independent of supply
voltage (1 mW/op amp at +5 VDC)
• Low input biasing current: 45 nADC (temperature-compensated)
• Low input offset voltage: 2 mVDC and offset current: 5 nADC
• Differential input voltage range equal to the power supply voltage
• Large output voltage: 0VDC to VCC–1.5 VDC swing
ORDERING INFORMATION
DESCRIPTION
14-Pin Plastic Dual In-Line Package (DIP)
14-Pin Plastic Small Outline (SO) Package
14-Pin Plastic Dual In-Line Package (DIP)
14-Pin Plastic Small Outline (SO) Package
14-Pin Plastic Dual In-Line Package (DIP)
14-Pin Plastic Small Outline (SO) Package
14-Pin Plastic Thin Shrink Small Outline Package (TSSOP)
14-Pin Plastic Dual In-Line Package (DIP)
14-Pin Plastic Small Outline (SO) Package
14-Pin Plastic Dual In-Line Package (DIP)
14-Pin Plastic Small Outline (SO) Package
14-Pin Plastic Thin Shrink Small Outline Package (TSSOP)
14-Pin Plastic Dual In-Line Package (DIP)
PIN CONFIGURATION
D, DH, and N Packages
OUTPUT 1 1
14 OUTPUT 4
–INPUT 1 2
1
–+
+4–
13 –INPUT 4
+INPUT 1 3
12 +INPUT 4
V+ 4
11 GND
+INPUT 2 5
10 +INPUT 3
–INPUT 2 6
–2+
+–
3
9 –INPUT 3
OUTPUT 2 7
8 OUTPUT 3
TOP VIEW
SL00065
Figure 1. Pin configuration.
TEMPERATURE RANGE
–55° C to +125 °C
–25 °C to +85 °C
–25 °C to +85 °C
0 °C to +70 °C
0 °C to +70 °C
0 °C to +70 °C
0 °C to +70 °C
0 °C to +70 °C
–40 °C to +85 °C
–40 °C to +85 °C
–40 °C to +125 °C
–40 °C to +125 °C
–40 °C to +125 °C
ORDER CODE
LM124N
LM224D
LM224N
LM324AD
LM324AN
LM324D
LM324DH
LM324N
SA534D
SA534N
LM2902D
LM2902DH
LM2902N
DWG #
SOT27-1
SOT108-1
SOT27-1
SOT108-1
SOT27-1
SOT108-1
SOT402-1
SOT27-1
SOT108-1
SOT27-1
SOT108-1
SOT402-1
SOT27-1
2003 Sep 19
2
Share Link: 