DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

M64285FP データシートの表示(PDF) - MITSUBISHI ELECTRIC

部品番号
コンポーネント説明
メーカー
M64285FP Datasheet PDF : 26 Pages
First Prev 11 12 13 14 15 16 17 18 19 20 Next Last
Technical Data Sheet
MITSUBISHI
PRELIMINARY
MITSUBISHI CMOS Image Sensor
M64285FP
11.6. Gain Setting Register, G (5 bits)
Register Range
Gain
Step
Number of Steps
00000 B ~ 10011 B
0 dB ~ 28.5 dB
1.5 dB
20
* The Register value of 5 figures is the arrangement of G4, G3, G2, G1, G0 in this order.
* [Gain] = [Register Value] x [Step]
* When the Gain is set to 0 dB ( G = 00000 ), the saturation output ( maximum signal
displacement from the black level ) is 2 V. This is the standard gain setting.
11.7. Black Level Output Voltage Setting Register, VREF (2 bits)
This register sets the output voltage corresponding to the image signal output value of 0.
VREF1
0
1
1
VREF0
1
0
1
Black Level
1.0 V
1.5 V
2.0 V
Remarks
Recommended for Normal Image Capture
Recommended for Edge Extraction Modes
11.8. Offset Subtraction Setting Register, OFST (5 bits)
Some image processing
application need to acquire
precisely the important
contrast information laying
Range Over
Optimum Range
Gain = (x 2)
in the high level part of the A/D Range
Gain = (x 2)
A/D conversion range. In
Vref
this case, by only setting
Offset Subtraction
the Gain higher, the output
easily exceed the A/D conversion range. M64285FP is able to subtract some offset from the
data before amplification. By means of this function, as shown in the figure, it becomes
possible to obtain high contrast image in the optimum range. OFST register decides the
magnitude of this offset. The output data is obtained after subtracting the value in the table
below from the image data, under the standard gain condition (0 dB). The offset value to be
subtracted is proportional to the gain. If there is no need of subtracting offset, as in the case
of capturing normal image in full range, set the OFST Register 00000.
Register Range
Offset
Step
Number of Steps
00000 B ~ 11111 B
0 V ~ 1.86 V
0.06 V
16
* The Register value of 5 figures is the arrangement of OFST4, OFST3, OFST2,
OFST1, OFST0 in this order.
* [Offset Value] = [Register Value] x [Step]
( 12 / 26 )
Specifications and information herein are subject to change without notice.
02 / 05 / 01
Ver. 2.2E_01

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]