HA-5020883 データシートの表示（PDF） - Intersil
部品番号
コンポーネント説明
メーカー
HA-5020883 Datasheet PDF : 19 Pages
| |||
Specifications HA-5020/883
TABLE 1. DC ELECTRICAL PERFORMANCE CHARACTERISTICS (Continued)
Device Tested at: Supply Voltage = ±15V, RSOURCE = 0Ω, AVCL = +1, RF = 1kΩ, RLOAD = 400Ω, VOUT = 0V, VDISABLE = V+,
Unless Otherwise Specified.
PARAMETERS
Disable Pin Input Current
SYMBOL
ILOGIC
CONDITIONS
VDIS = 0V
Minimum DISABLE Pin
Current to Disable
Maximum DISABLE Pin
Current to Enable
Quiescent Power Supply
Current
IDIS
Note 2
IEN
Note 3
ICC
RL = 400Ω
IEE
RL = 400Ω
Disabled Power Supply
Current
ICCDIS
RL = 400Ω, VDIS = 0V
IEEDIS
RL = 400Ω, VDIS = 0V
Offset Voltage
Adjustment
+VADJ
Note 4
-VADJ
Note 4
GROUP A
SUBGROUP
1, 2
3
1
2, 3
1
2, 3
1
2, 3
1
2, 3
1
2, 3
1
2, 3
1
2, 3
1
2, 3
TEMPERATURE
+25oC, +125oC
-55oC
+25oC
+125oC, -55oC
+25oC
+125oC, -55oC
+25oC
+125oC, -55oC
+25oC
+125oC, -55oC
+25oC
+125oC, -55oC
+25oC
+125oC, -55oC
+25oC
+125oC, -55oC
+25oC
+125oC, -55oC
LIMITS
MIN MAX
-1
0
-1.5
0
-
350
-
350
20
-
20
-
-
10
-
10
-10
-
-10
-
-
5.6
-
7.5
-5.6
-
-7.5
-
30
-
25
-
-
-30
-
-25
UNITS
mA
mA
µA
µA
µA
µA
mA
mA
mA
mA
mA
mA
mA
mA
mV
mV
mV
mV
NOTES:
1. Guaranteed from VOUT test by IOUT = VOUT/400Ω.
2. This is the minimum current which must be sourced from the DISABLE pin, to disable the output. The output is considered disabled when
VOUT ≤ 10mV. Conditions are: VIN = 10V, RL = 100Ω. The test is performed by sourcing 350µA from the DISABLE pin, and testing that
the output decreases below the test limit (10mV).
3. This is the maximum current that can be sourced from the DISABLE pin with the device remaining enabled. The device is considered
disabled when the supply current decreases by at least 0.5mA. Conditions are: RL = 400Ω. Test is performed by sourcing 20µA from the
DISABLE pin, and testing that the supply current decreases by no more than the test limit (0.5mA).
4. The offset adjustment range is referred to the output. The inverting input current (-IBIAS) can be adjusted with an external pot between pins
1 and 5, wiper connected to V+. Since -IBIAS flows through RF, an adjustment of offset voltage results. The amount of offset adjustment is
proportional to the value of RF. Test conditions are: RL = Open, 10kΩ from pin 5 to V+, 1kΩ from pin 1 to V+, for +VADJ; RL = Open, 1kΩ
from pin 5 to V+, 10kΩ from pin 1 to V+, for -VADJ.
TABLE 2. AC ELECTRICAL PERFORMANCE CHARACTERISTICS
Device Tested at: Supply Voltage = ±15V, RSOURCE = 50Ω, RLOAD = 400Ω, CLOAD ≤ 10pF, AVCL = +1V/V, Unless Otherwise Specified.
PARAMETERS
Slew Rate
SYMBOL
+SR
CONDITIONS
VIN = -10V to +10V
-SR
VIN = +10V to -10V
GROUP A
SUBGROUP
4
5, 6
4
5, 6
TEMPERATURE
+25oC
+125oC, -55oC
+25oC
+125oC, -55oC
LIMITS
MIN MAX
600
-
400
-
600
-
400
-
UNITS
V/µs
V/µs
V/µs
V/µs
Spec Number 511080-883
3-97
Share Link: 