CS5201-3GDP3 データシートの表示（PDF） - ON Semiconductor

部品番号

コンポーネント説明

メーカー

CS5201-3GDP3

1.0 A, 3.3 V Fixed Linear Regulator

ON Semiconductor 

CS5201−3

1.0 A, 3.3 V Fixed Linear

Regulator

The CS5201−3 linear regulator provides 1.0 A @ 3.3 V reference at

1.0 A with an output voltage accuracy of ±1.5%.

This regulator is intended for use as a post regulator and

microprocessor supply. The fast loop response and low dropout

voltage make this regulator ideal for applications where low voltage

operation and good transient response are important.

The circuit is designed to operate with dropout voltages less than 1.2 V

at 1.0 A output current.

The maximum quiescent current is only 10 mA at full load. Device

protection includes overcurrent and thermal shutdown.

The CS5201−3 is pin compatible with the LT1086 family of linear

regulators.

The regulator is available in TO−220−3, surface mount D2, and

SOT−223 packages.

Features

• Pb−Free Package is Available

• Output Current to 1.0 A

• Output Accuracy to ±1.5% Overtemperature

• Dropout Voltage (typical) 1.0 V @ 1.0 A

• Fast Transient Response

• Fault Protection

♦ Current Limit

♦ Thermal Shutdown

10 mF

5.0 V

VIN

VOUT

CS5201−3

GND

3.3 V @ 1.0 A

22 mF

5.0 V

http://onsemi.com

TO−220−3

T SUFFIX

CASE 221A

12 3

123

12 3

D2PAK−3

DP SUFFIX

CASE 418AB

Tab = VOUT

Pin 1. GND

2. VOUT

3. VIN

SOT−223

ST SUFFIX

CASE 318E

ORDERING INFORMATION

See detailed ordering and shipping information in the package

dimensions section on page 6 of this data sheet.

DEVICE MARKING INFORMATION

See general marking information in the device marking

section on page 6 of this data sheet.

Figure 1. Applications Diagram

© Semiconductor Components Industries, LLC, 2006

1

September, 2006 − Rev. 8

Publication Order Number:

CS5201−3/D

Share Link: