WM8716EDS データシートの表示（PDF） - Wolfson Microelectronics plc

部品番号

コンポーネント説明

メーカー

WM8716EDS

High Performance 24-bit, 192kHz Stereo DAC

Wolfson Microelectronics plc 

Production Data

WM8716

DEVICE DESCRIPTION

The WM8716 is a high performance 128fs oversampling rate stereo DAC employing a novel 64 level

sigma delta DAC design which provides optimised signal-to-noise performance and clock jitter

tolerance. It is ideally suited to high quality audio applications such as CD, DVD-audio, home theatre

receivers and professional mixing consoles. The WM8716 supports sample rates from 8ks/s to

192ks/s.

The control functions of the WM8716 are either pin selected (hardware mode) or programmed via the

serial interface (software mode). Control functions that are available include: data input word length

and format selection (16-24 bits: I2S, left justified or right justified): de-emphasis sample rate

selection (48kHz, 44.1kHz and 32kHz); differential output modes; a software or hardware mute and

independently digitally controllable attenuation on both channels.

The digital filtering may be bypassed entirely by selecting MODE8X. Data is then input directly to the

DAC, bypassing the digital filters. Left and right channels are input separately, using the MODE pin

as the right channel input. This mode allows the use of alternative digital filters, such as the Pacific

Microsonics PMD100 HDCD filter.

SYSTEM CLOCK

In addition to the normal stereo operating mode the WM8716 may also be used in dual differential

mode with either the left or right channel (selectable) being output differentially. Two WM8716s can

then be used in parallel to implement a stereo channel, each supporting a single channel

differentially. This mode is available in both software and hardware modes and may also be used in

conjunction with MODE8X.

Sample rates from 8ks/s up to 96ks/s are available, and automatically selected, with a system clock

of 256fs, 384fs, 512fs or 768fs. In addition a system clock of 128fs or 192fs may be used, with

sample rates up to 192ks/s. With a 128fs or 192fs system clock 64x oversampling mode operation is

automatically selected and the first stage of the digital filter is bypassed.

WM8716 has an asynchronous monitor circuit, which in the event of removal of the master system

clock, resets the digital filters and analogue circuits, muting the output. Re-application of the system

clock re-starts the filters from an intitialised state. Control registers are not reset under this condition.

The WM8716 is tolerant of asynchronous bit clock jitter. The internal signal processing

resynchronises to the external LRCIN once the phase difference between bit clock and the system

clock exceeds half an LRCIN period. During this re-synch period the interpolating filters will either

miss or repeat an audio sample, minimising the audible effects of the operation. Table 1 shows the

typical system clock frequency inputs for the WM8716.

SAMPLING

RATE

(LRCIN)

128fs

SYSTEM CLOCK FREQUENCY (MHZ)

192fs

256fs

384fs

512fs

32kHz

44.1kHz

4.096

5.6448

6.144

8.467

8.192

11.2896

12.288

16.9340

16.384

22.5792

48kHz

96kHz

192kHz

6.114

12.288

24.576

9.216

18.432

36.864

12.288

18.432

24.576

24.576

36.864 Unavailable

Unavailable Unavailable Unavailable

Table 1 System Clock Frequencies Versus Sampling Rate

768fs

24.576

33.8688

36.864

Unavailable

Unavailable

WOLFSON MICROELECTRONICS LTD

PD Rev 3.1 April 2001

7

Share Link: