5962-9669001HUC データシートの表示（PDF） - Aeroflex Corporation
部品番号
コンポーネント説明
メーカー
5962-9669001HUC Datasheet PDF : 21 Pages
| |||
z
Absolute Maximum Ratings
Parameter
Case Operating Temperature
Storage Temperature Range
Supply Voltage Range
Signal Voltage Range (Any Pin Except A9) Note 1
Maximum Lead Temperature (10 seconds)
Data Retention
Endurance (Write/Erase cycles)
A9 Voltage for sector protect, Note 2
Symbol
TC
TSTG
VCC
VG
VID
Range
-55 to +125
-65 to +150
-2.0 to +7.0
-2.0 to +7.0
300
10
100,000 Minimum
-2.0 to +14.0
Units
°C
°C
V
V
°C
Years
V
Note 1. Minimum DC voltage on input or I/O pins is -0.5V. During voltage transitions, inputs may undershoot VSS to -2.0v for periods of
up to 20ns. Maximum DC voltage on input and I/O pins is VCC + 0.5V. During voltage transitions, inputs and I/O pins may
overshoot to VCC + 2.0V for periods up to 20 ns.
Note 2. Minimum DC input voltage on A9 is -0.5V. During voltage transitions, A9 may undershoot VSS to -2.0V for periods of up to 20ns.
Maximum DC input voltage on A9 is +12.5V which may overshoot to 14.0V for periods up to 20ns.
Symbol
VCC
VIH
VIL
Tc
VID
Normal Operating Conditions
Parameter
Power Supply Voltage
Input High Voltage
Input Low Voltage
Operating Temperature (Military)
A9 Voltage for sector protect
Minimum
+4.5
+2.0
-0.5
-55
11.5
Maximum
+5.5
VCC + 0.5
+0.8
+125
12.5
Units
V
V
V
°C
V
Symbol Parameter
CAD
A0 – A16 Capacitance
COE
CWE
OE Capacitance
Write Enable Capacitance
CCE Chip Enable Capacitance
CI/O I/O0 – I/O7 Capacitance
Parameters Guaranteed but not tested
Capacitance
(VIN= 0V, f = 1MHz, Tc = 25°C)
Maximum
15
15
15
15
15
Units
pF
pF
pF
pF
pF
DC Characteristics – CMOS Compatible
(Vcc = 5.0V, Vss = 0V, Tc = -55°C to +125°C, unless otherwise indicated)
Parameter
Sym
Conditions
Speeds 60, 70, 90, 120 & 150ns
Minimum Maximum Units
Input Leakage Current
ILI VCC = 5.5V, VIN = GND to VCC
10
µA
Output Leakage Current
Active Operating Supply Current for Read (1)
Active Operating Supply Current for Program or Erase (2)
ILO
ICC1
ICC2
VCC = 5.5V, VIN = GND to VCC
CE = VIL, OE = VIH, f = 5MHz
CE = VIL, OE = VIH
10
µA
35
mA
50
mA
Operating Standby Supply Current
ICC3 VCC = 5.5V, CE = VIH, f = 5MHz
1.6
mA
Output Low Voltage
VOL IOL = +8.0 mA, VCC = 4.5V
0.45
V
Output High Voltage
VOH IOH = –2.5 mA, VCC = 4.5V
0.85 x VCC
V
Low Power Supply Lock-Out Voltage (4)
VLKO
3.2
V
Note 1. The Icc current listed includes both the DC operating current and the frequency dependent component (At 6 MHz). The frequency
component typically is less than 2 mA/MHz, with OE at VIN.
Note 2. Icc active while Embedded Algorithm (Program or Erase) is in progress.
Note 3. DC Test conditions: VIL = 0.3V, VIH = VCC - 0.3V, unless otherwise indicated.
Note 4. Parameter Guaranteed by design, but not tested.
Aeroflex Circuit Technology
3
SCD1676 REV A 5/6/98 Plainview NY (516) 694-6700
Share Link: 