HMC132C8 データシートの表示（PDF） - Hittite Microwave

部品番号

コンポーネント説明

メーカー

HMC132C8

GaAs MMIC SMT HIGH-ISOLATION SPDT SWITCH, DC - 8 GHz

Hittite Microwave 

v01.0701

MICROWAVE CORPORATION

HMC132C8

GaAs MMIC SMT HIGH-ISOLATION

SPDT SWITCH, DC - 8 GHz

Evaluation Circuit Board

7

The circuit board used in the final application should use RF circuit design techniques. Signal lines should have

50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the

ground plane similar to that shown above. A sufficient number of VIA holes should be used to connect the top and

bottom ground planes. The evaluation circuit board as shown above is available from Hittite Microwave Corpora-

tion upon request.

Evaluation Circuit Board Layout Design Details

Layout Technique

Grounded Co-Planar Waveguide (GCPW)

Material

Rogers 4350

Dielectric Thickness

0.020" (0.51 mm)

50 Ohm Line Width

0.034" (0.86 mm)

Gap to Ground Edge

0.010" (0.25 mm)

Ground VIA Hole Diameter 0.014" (0.36 mm)

Connectors

SMA-F (EF - Johnson P/N 142-0701-806)

7 - 12

For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Visit us at www.hittite.com, or Email at sales@hittite.com

Share Link: