SMAJ Series
Transient Voltage Suppressor
Features:
• For surface mounted application.
• Low profile package.
• Built-in strain relief.
• Glass passivated junction.
• Excellent clamping capability.
• Fast response time : Typically less than 1.0 ps from 0 volts to 8 volts min.
• Typical IR less than 1 µA above 10 V.
• High temperature soldering guaranteed : 260°C / 10 s at terminals.
• Plastic material used carried underwriters laboratory flammability classification 94V-0.
• 400 watts peak pulse power capability with a 10 / 1,000 µs waveform (300 W above 78 V).
SMA/DO-214AC
Mechanical Data
Case
Terminals
Polarity
Packaging
: Moulded plastic.
: Pure tin plated, lead free.
: Indicated by cathode band.
: 12 mm tape per EIA std RS-481.
Dimensions : Inches (Millimetres)
Marking Diagram
XX
= Specific device code
G
= Green compound
Y
= Year
M
= Work month
Maximum Ratings and Electrical Characteristics
Ratings at 25°C ambient temperature unless otherwise specified.
Type Number
Symbol
Value
Unit
Peak Power Dissipation at TA = 25°C, Tp = 1 ms (Note 1)
Steady State Power Dissipation
Peak Forward Surge Current, 8.3 ms Single Half
Sine-wave Superimposed on Rated Load
(JEDEC method) (Note 2, 3)
PPK
PD
IFSM
Minimum 400
1
40
Watts
Amps
Maximum Instantaneous Forward Voltage at 25 A for
Unidirectional Only
VF
3.5
Volts
Operating and Storage Temperature Range
TJ, TSTG
-55 to +150
°C
Note 1: Non-repetitive current pulse per Fig. 3 and derated above TA = 25°C per fig. 2.
Note 2: Mounted on 5 × 5 mm (0.013 mm thick) copper pads to each terminal.
Note 3: 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum.
www.element14.com
www.farnell.com
www.newark.com
Page <1>
26/05/11 V1.1