5020 データシートの表示（PDF） - M.S. Kennedy Corporation

部品番号

コンポーネント説明

メーカー

5020

HIGH CURRENT, SUPER LOW DROPOUT FIXED VOLTAGE REGULATORS

M.S. Kennedy Corporation 

TYPICAL CONNECTION DIAGRAM

The above connection diagram illustrates an MSK 5020-3.3 regulator. Q1 turns on the Fault L.E.D. when pin 6 of

the hybrid drops to a logic low. Current into pin 6 is limited to approximately 1mA by the 12KΩ resistor from pin 5

to pin 6. The optimum value of capacitance COUT may vary from one application to the next depending on the load

applied. 33µF is a good starting point. The ENABLE input is TTL compatible but can be tied to the input voltage when

shutdown is not needed. RSC should be selected for the desired current limit. See current limit connections applica-

tion note.

5

Rev. G 12/06

Share Link: