LC72720YV(2013) データシートの表示（PDF） - ON Semiconductor
部品番号
コンポーネント説明
メーカー
LC72720YV Datasheet PDF : 18 Pages
| |||
Sample Application circuit
LC72720YV
10 μF +
Vssa
MPXIN
330 pF
Vdda
0.1 μF
Vssa
560 pF 100 kΩ
1 VREF
2 MPXIN
3 Vdda
5 Vssa
6 FLOUT
7 CIN
9 T1
10 T2
Vssd
NC 11 T3
NC 13 T4
NC 14 T5
15 XOUT
SYR 30 SYR
Vssd
CE 29
CE
DI 28
DI
CL 26
DO 25
RDS-ID 24
SYNC 22
Vddd
10 kΩ
Vddd
10 kΩ
Vddd
10 kΩ
CL
DO
RDS-ID
SYNC
T7 21 NC
T6 20 NC
Vssd 18
Vddd 17
Vssd
0.1 μF
Vddd
XIN 16
16 pF
Vssd
4.332 MHz
16 pF
Vssd
Caution : 1. Determine the value of the DO pin pull-up resistor based on the required serial data transfer speed.
2. A 100-kΩ bias resistor must be connected between the CIN pin and the VREF pin. Note that this resistor
is planned to be included internally to the IC in later versions of this product.
3. If the SYR pin is unused, it must be connected to ground.
ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at
www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no
warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the
application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental
damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual
performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical
experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use
as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in
which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for
any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors
harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or
death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the
part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PS No. 6488-18/18
Share Link: 