G9SX-EX221-F10-RC データシートの表示（PDF） - OMRON Corporation

部品番号

コンポーネント説明

メーカー

G9SX-EX221-F10-RC

Low-speed Monitoring Unit

OMRON Corporation 

G9SX-LM

Specifications

Ratings

Power input

Item

Model

G9SX-LM224-@

Rated supply voltage

24 VDC

Operating voltage range

-15% to +10% of rated supply voltage

Power consumption *

5 W max.

* Power consumption of loads not included.

G9SX-EX401-@

2 W max.

Inputs

Item

Model

G9SX-LM224-@

Safety input

Enabling input

Feedback/reset input

Mode selector input

Operating voltage: 20.4 VDC to 26.4 VDC

Internal impedance: Approx. 2.8 kΩ *

Rotation detection input

Operating voltage: 20.4 VDC to 26.4 VDC

Internal impedance: Approx. 2.8 kΩ *

Frequency input range: 1 kHz max.

* Provide a current equal to or higher than that of the minimum applicable load of the connected input control device.

Outputs

Item

Model

G9SX-LM224-@

Safety instantaneous output *1

Source output (PNP compatible)

Load current: 0.8 A DC max. *2

Safety speed detection output *1

Source output (PNP compatible)

Load current: 0.3 A DC max.

Auxiliary output

Source output (PNP compatible)

Load current: 100 mA DC max.

*1. While safety instantaneous outputs and safety speed detection outputs are in the ON state, the following pulse signal is output continuously

for output circuit diagnosis.

When using these safety outputs as input signals to control devices (i.e. Programmable Controllers), consider the pulse signal shown below.

Approx. 100 ms

ON

OFF

360 µs max.

*2. The following derating is required when Units are mounted side-by-side.

G9SX-LM@: 0.4 A DC max. load current

Expansion Unit

Item

Model

Rated load

250 VAC, 3A /30 VDC, 3A (resistive load)

Rated carry current

3A

Maximum switching voltage

250 VAC, 125 VDC

G9SX-EX-@

2

Share Link: