TPSMC10(1999) データシートの表示（PDF） - General Semiconductor
部品番号
コンポーネント説明
メーカー
TPSMC10 Datasheet PDF : 4 Pages
| |||
TPSMC6.8 THRU TPSMC43A
AUTOMOTIVE SURFACE MOUNT
TRANSIENT VOLTAGE SUPPRESSOR
Breakdown Voltage - 6.8 to 43 Volts Peak Pulse Power - 1500 Watts
PATENTED
DO-214AB
Modified J-Bend
0.126 (3.20)
0.114 (2.90)
0.245 (6.22)
0.220 (5.59)
0.103 (2.62)
0.079 (2.06)
0.060 (1.52)
0.030 (0.76)
0.280 (7.11)
0.260 (6.60)
0.012 (0.305)
0.006 (0.152)
0.320 (8.13)
0.305 (7.75)
0.008 (0.203)
MAX.
Dimensions in inches and (millimeters)
Available in uni-directional only
FEATURES
♦ Designed for under the hood
surface mount applications
♦ Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
♦ Easy pick and place
♦ Low profile package
♦ Built-in strain relief
♦ Ideal for automated placement
♦ Exclusive patented PAR™ oxide passivated
chip construction
♦ 1500W peak pulse power capability with a 10/1000µs
waveform, repetition rate (duty cycle): 0.01%
♦ Excellent clamping capability
♦ Low incremental surge resistance
♦ Fast response time: typically less than
1.0ps from 0 Volts to V(BR)
♦ For devices with V(BR)≥10V ID are typically less than
1.0µA at TA=150°C
♦ High temperature soldering:
250°C/10 seconds at terminals
MECHANICAL DATA
Case: JEDEC DO-214AB molded plastic body over
passivated junction
Terminals: Solder plated, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes positive end (cathode)
Mounting Position: Any
Weight: 0.007 ounces, 0.2 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Peak pulse power dissipation with a 10/1000µs
waveform (NOTES 1, 2, FIG. 3)
Peak power pulse current with a 10/1000µs
waveform (NOTE 1, FIG. 1)
Peak forward surge current
8.3ms single half sine-wave superimposed on
rated load (JEDEC Method) (NOTES 2, 3)
Maximum instantaneous forward voltage at 100A (NOTE 3)
Operating junction and storage temperature range
SYMBOLS
PPPM
IPPM
IFSM
VF
TJ, TSTG
VALUE
Minimum 1500
SEE TABLE 1
200.0
3.5
-65 to +185
NOTES:
(1) Non-repetitive current pulse, per Fig.3 and derated above TA=25°C per Fig. 2
(2) Mounted on 0.31 X 0.31” (8.0 X 8.0mm) copper pads to each terminal
(3) Measured on 8.3ms single half sine-wave, or equivalent square wave, duty cycle=4 pulses per minute maximum
1/27/99
UNITS
Watts
Amps
Amps
Volts
°C
Share Link: 