184736-01 データシートの表示（PDF） - National Instruments Corporation

部品番号

コンポーネント説明

メーカー

184736-01

Configurable Signal Conditioning Enclosure

National Instruments Corporation 

Configurable Signal Conditioning Enclosure

Interface Panelettes

National Instruments also offers interface panelettes, which expand

the functionality of the CA-1000. Interface panelettes include

traditional interface controls and displays, such as rocker switches,

toggle switches, momentary switches, potentiometers, and LEDs.

Using interface panelettes, which are mounted alongside I/O

panelettes, you can change hardware inputs, trigger events, or verify

operational status. Each interface panelette includes lead wires for

connection to the screw terminals of the accessory mounted inside

the CA-1000.

Cabling

The cabling needed to connect the CA-1000 to the measurement

device depends on the accessories installed in the CA-1000 and the

measurement device used. Some accessories installed in the CA-1000

require internal cabling to connect the accessory to the CA-1000 wall.

Use Table 1 to determine which cabling components you need,

including the cable to your measurement device.

The CA-1000 also provides the flexibility of five external

interconnection locations, giving convenient cabling for laptop

applications by aligning the I/O connector with the location of the

PCMCIA slots on laptop computers. With the five external

interconnection locations, you can also customize desktop and rack-

mount applications for added convenience.

Minithermocouple

BNC

SMB

9-Pin D-Sub

Banana Jack

LEMO (B-Series)

MIL-Spec

Toggle Switch

Rocker Switch

LED

Figure 1. CA-100 Panelettes Options

Strain Relief

Potentiometer

Momentary Switch

Blank

Device

68-pin E Series DAQ Devices (except DAQCards)

100-pin E Series DAQ Devices3

Latching E Series DAQCards

DAQCard-6062E, DAQCard-6024E

Nonlatching E Series DAQCards:

DAQCard-AI-16E-4, DAQCard-AI-16XE-50

68-pin digital I/O and counter/timer devices (except DAQCards)

PCI-DIO-32HS, PXI-6533, AT-DIO-32HS,

NI 6534, NI 660x

Nonlatching 68-pin digital I/O DAQCards:

DAQCard-6533

Simultaneous sampling multifunction DAQ devices

PCI-6503

PC-DIO-24

DAQCard-DIO-24

NI 65273, PCI-DIO-963, PXI-65083, DAQPad-65083

PC-DIO-963

SC-204x Series

R68M-50F and SH68-68-EP1

Applicable for one leg

R68M-50F and SHC68-68-EP

–

R68M-50F and PSHR68-68 shielded cable kit 2

N/A

–

–

N/A

–

N/A

N/A

–

N/A

N/A

N/A

CB-50LP

N/A

N/A

N/A

–

N/A

Connector Blocks

CB-68LPR or SCB-68

SH68-68-EP1

SH1006868

SHC68-68-EP

–

PSHR68-68 shielded cable kit2

N/A

–

–

N/A

–

N/A

R5OM-50F and SH50-50

–

R5OM-50F and PSH27-50F-D1

Two R50M-50F and R1005050 4

Two R50M-50F and NB54

SH68-68-D1

–

–

PSHR68-68-D1 shielded cable kit

–

SH68-68-EP1

N/A

–

N/A

N/A

N/A

1You can also use the SH68-68R1-EP or R6868. 2You can also use the PR68-68F. 3You can use two CA-1000 enclosures with one of these devices. Please note: If you are using a NI 435x series data logger, please see Table 2 on page 358 for information on

cabling to a CB-68T and CA-1000. 4Splits into two 50-pin connectors. See page 368 for information on using the CA-1000 with analog output products.

Table 1. CA-1000 Cabling

2 National Instruments • Tel: (800) 433-3488 • Fax: (512) 683-9300 • info@ni.com • ni.com

Share Link: