LT1413 データシートの表示（PDF） - Linear Technology

部品番号

コンポーネント説明

メーカー

LT1413

Single Supply, Dual Precision Op Amp

Linear Technology 

LT1413

APPLICATIONS INFORMATION

Single Supply Operation

The LT1413 is fully specified for single supply operation,

i.e., when the negative supply is 0V. Input common-mode

range includes ground; the output swings within a few

millivolts of ground.

If the input is more than a few hundred millivolts below

ground, two distinct problems can occur on previous

single supply designs, such as the LM124, LM158, OP-21

and OP-221.

a) When the input is more than a diode drop below

ground, unlimited current will flow from the substrate

(V– terminal) to the input. This can destroy the unit. On

the LT1413, the 400Ω resistors, in series with the input

(see Schematic Diagram), protect the devices even when

the input is 5V below ground.

other amplifier out of negative saturation for the phase

reversal protection to function properly.

Since the output of the LT1413 cannot go exactly to

ground, but can only approach ground to within a few

millivolts, care should be exercised to ensure that the

output is not saturated. For example, a 1mV input signal

will cause the amplifier to set up in its linear region

in the gain 100 configuration shown below, but is not

enough to make the amplifier function properly in the

voltage-follower mode.

Gain 100 Amplifier

Voltage Follower

5V

R

–

1mV +

5V

99R

–

100mV

1mV +

OUTPUT

SATURATED

≈ 15mV

b) When the input is more than 400mV below ground

(at 25°C), the input stage saturates (transistors Q3 and

Q4) and phase reversal occurs at the output. This can

cause lock-up in servo systems. Due to a unique phase

reversal protection circuitry (Q21, Q22, Q27, Q28), the

LT1413 outputs do not reverse, as illustrated below,

even when the inputs are at –1.5V. Keep the output of the

LT1413 • 27

Figure 1.

Comparator Applications

The single supply operation of the LT1413 lends itself to

its use as a precision comparator with TTL compatible

output; the response time is shown below.

Voltage Follower with Input Exceeding the Negative Common-Mode Range

4V

4V

4V

2V

2V

2V

0V

0V

0V

6VP-P INPUT, –1.5V TO 4.5V

LT1413 • TA21

LM324, LM358, OP-221

EXHIBIT OUTPUT PHASE REVERSAL

LT1413

NO PHASE REVERSAL

LT1413 • TA22

Comparator Rise Response Time

Comparator Fall Response Time

10mV, 5mV, 2mV Overdrives

to 10mV, 5mV, 2mV Overdrives

LT1413 • TA23

4

4

2

2

0

0

0

100

–100

VS = 5V, 0V

50µs/DIV

LT1413 • TA24

0

VS = 5V, 0V

50µs/DIV

LT1413 • TA25

Information furnished by Linear Technology Corporation is believed to be accurate and reliable.

However, no responsibility is assumed for its use. Linear Technology Corporation makes no represen-

tation that the interconnection of its circuits as described herein will not infringe on existing patent rights.

7

Share Link: