V23076-A3022-C132 データシートの表示（PDF） - TE Connectivity
部品番号
コンポーネント説明
メーカー
V23076-A3022-C132 Datasheet PDF : 4 Pages
| |||
Automotive Relays
PCB Single Relays
Power Relay K (Sealed) (Continued)
Coil Data
Rated coil voltage
12VDC / 24VDC
Coil versions, DC coil
Coil
Rated
Operate Release
Coil
Rated coil
code
voltage
voltage
voltage resistance power
VDC
VDC
VDC
Ω±10%
W
001
12
6.9
1.2
90
1.6
022
24
14.1
2.4
362
1.6
All figures are given for coil without pre-energization, at ambient temperature +23°C.
Other coils on request.
Insulation Data
Initial dielectric strength
between open contacts
between contact and coil
500VACrms
500VACrms
Other Data
EU RoHS/ELV compliance
compliant
Ambient temperature, DC coil
-40 to +85°C6)
Climatic cycling with condensation,
EN ISO 6988 3 cycles, storage 8/16h
Temperature cycling (shock),
IEC 60068-2-14, Na
20 cycles, -40/+85°C (dwell time 1h)
Damp heat cyclic,
IEC 60068-2-30, Db, Variant 1 6 cycles, upper air temperature 55°C
Other Data (continued)
Damp heat constant,
56 days, upper air temperature 55°C
IEC 60068-2-3, method Ca
RT III – immersion cleanable version
Corrosive gas,
IEC 60068-2-42
10 days
IEC 60068-2-43
10 days
Vibration resistance (functional),
IEC 60068-2-6 (sine pulse form),
acceleration, acc. to position 10 to 200Hz, 20 to 40g7)
Shock resistance (functional),
IEC 60068-2-27 (half sine form single pulses),
acceleration, acc. to position
8ms 30g7)
Terminal type
PCB
Weight
sealed version approx. 22g (0.77oz)
open version approx. 19g (0.67oz)
Solderability (aging 3: 4h/155°C)
for leaded process (Tm = 183°C),
for Pb-free process (Tm = 217°C),
IEC 60068-2-20
Ta, method 1, hot dip 5s, 215°C
Storage conditions according IEC 600688 8)
Packaging unit
sealed version
525 pcs.
6) See coil operating range DC.
7) No change in the switching state >10μs.
8) For general storage and processing recommendations please refer to our Application
Notes and especially to Storage in the Definitions or at http://relays.te.com/appnotes/
Terminal Assignment
Bottom view on solder pins
1 form A, 1 NO
*)
1 form C, 1 CO
*)
TE1091-B1
*) Terminals 4 to be bridged
TE1086-A1
Dimensions
8.5 ±0.2
26.1 ±0.4
Assembly and
positioning aid
3.4 ±0.1
3.4 ±0.1
21.1 ±0.4
Mounting Hole Layout
Bottom view on solder pins
10.2 ±0.2
6.0 ±0.2
3.4 ±0.6
16.0 ±0.3
ø 1.3 +0.1
ø 2.3 +0.1
6.6 ±0.3
12.1 ±0.1 3.3 ±0.1
ø 2.1 +0.1
2.2 ±0.1
21.2 ±0.3
2.5 – 3.0
Terminals tinned
3.0 ±0.5 *)
0.55 ±0.25
TE0579-I2
*) additional tin tops
max. 1.5 mm
ø 2.3 +0.1
2.3 ±0.2
2
06-2014, Rev. 0614
www.te.com
© 2014 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
ø 2.3 +0.1
13.3 ±0.2
TE0580-L2
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
Share Link: 