SDP4-24-100LT データシートの表示（PDF） - Unspecified

部品番号

コンポーネント説明

メーカー

SDP4-24-100LT

Power Supplies

Unspecified 

Power Supplies

3

SDP™ Series Specifications (24 V models)

Description

Input Voltage 1

Input Frequency

Input Current

External Fusing

Hold-Up Time

Efficiency

Losses

Output Voltage

Voltage Regulation

Ripple/Noise 2

Overvoltage Protection (OVP)

Output Noise

Suppression

Rated Continuous

Loading

Overload Behavior

Protection

Power Back Immunity

Status Indicators

Case & Mounting

H x W x D - inches (mm)

Weight - lbs (kg)

Mounting Orientation

Ventilation/Cooling

•Free space for cooling

Connection

•Connector size range

Electromagnetic

Emissions (EMC)

Electromagnetic

Immunity (EMI)

Temperature

MTBF

Humidity  

Safe Low Voltage

Protection Class/Voltage

Warranty

Catalog Number

SDP 06-24-100T

SDP 1-24-100T

SDP 2-24-100T

SDP 4-24-100LT

SDP 4-24-100RT

Input

85-264 Vac, 90-375 Vdc

85-132 / 176-264 Vac, 210-375 Vdc

47-63 Hz

0.4 A / 0.25 A

0.7 A / 0.4 A

1.1 A / 0.7 A

1.8 A / 1.0 A

2.2 A / 1.2 A

Not required. Unit provides internal fuse (T3A, not accessible)

> 25 ms

> 80% typ.

> 83% typ.

> 86% typ.

> 88% typ.

< 3.75 W typ.

< 6.1 W typ.

< 8.1 W typ.

< 12 W typ.

Output

24 V (22.5 - 28.5 Vdc Adj.)

24 V (24 - 25.7 Vdc Adj.) 24 V (22.5 - 28.5 Vdc Adj.)

Static 0.5% Vout, dynamic + 2% Vout overall\

< 50 mVpp

> 30 Vdc, but < 33 Vdc, auto recovery

> 26 Vdc, but < 27.2

Vdc, auto recovery

> 30 Vdc, but < 33 Vdc,

auto recovery

Radiated EMI values below EN61000-6-2

0.63 A @ 24 Vdc /

0.54 A @ 28 Vdc

2.95 x 0.90 x 3.80

(75.0 x 22.8 x 96.7)

0.4 lbs (.18 kg)

1.3 A @ 24 Vdc /

1.1 A @ 28 Vdc

2.1 A @ 24 Vdc /

1.8 A @ 28 Vdc

3.8 A @ 24.5 Vdc

4.2 A @ 24.5 Vdc /

3.6 A @ 28 Vdc

Continuous operation at overload/short-circuit: up to 1.5 x Nominal Current Continuous

Unit is continuously protected against short-circuit, overload and open-circuit.

35 V

Installation

Green LED on, when Vout “OK”.

Molded plastic housing using UL 94 approved flameproof material rating 94V-2.

Simple snap-on to DIN TS35/7.5 or TS35/15 rail system.

Dimensions

2.95 x 1.77 x 3.58

(75.0 x 45.0 x 91.0)

0.5 lbs (.23 kg) 

2.95 x 2.85 x 3.80

(75.0 x 72.5 x 96.7)

0.7 lbs (.32 kg)

Standard: Vertical; Optional: Horizontal or on top (Contact Technical Services).

Normal convection, no fan required; Above/below: 25 mm recommended.

Input: screw terminals, connector size range: 20-12AWG (1.5 - 6 mm2) for solid or stranded conductors.

General

EN61000-6-3 (Includes EN61000-6-4) Class B (EN 55022) incl. Annex A

EN61000-6-2 (Includes EN61000-6-1) (EN55024) Criterion A: no derogation of performance

Storage: -25°C to +85°C Operation: -10° to +60°C full power with linear derating to half power from 60°C to 70°C.

(Convection cooling, no forced air required).

> 500,000 hours according to Telcordia/Bellcore Document SR-332, Issue 1

Up to 90% RH, noncondensing; IEC 68-2-2, 68-2-3

SELV (acc. EN60950)

IP20 (IEC529), Protection Class 1 (IEC536)

3 year limited warranty

Notes:

1. Not UL listed for DC input.

2. Ripple/noise is stated as typical values when measured with a 20 MHz, bandwidth scope and 50 Ohm resistor.

Contact Technical Services at (800) 377-4384 with any questions.

135

Visit our website at www.solahd.com.

Share Link: