EMC6D102 データシートの表示（PDF） - Microchip Technology

部品番号

コンポーネント説明

メーカー

EMC6D102

Fan Control Device with Hardware Monitoring and Acoustic Noise Reduction Features

Microchip Technology 

Fan Control Device with Hardware Monitoring and Acoustic Noise Reduction Features

Datasheet

Chapter 1 General Description

The EMC6D102 is an environmental monitoring device with automatic fan control capability. This ACPI

compliant device provides hardware monitoring for up to five voltages and three thermal zones,

measures the speed of up to four fans, and controls the speed of multiple DC fans using Pulse Width

Modulator (PWM) outputs.

The EMC6D102 hardware monitor provides analog inputs for monitoring external voltages of +2.5V,

+5V, +12V and Vccp. This device has the capability to monitor its own internal VCC power supply,

which may be connected to either main power (VCC) or the suspend power well (VTR). In addition to

monitoring the processor voltage, VID inputs are available to identify the voltage specification. External

components are not required for voltage scaling or similar treatment.

The EMC6D102 hardware monitor includes support for monitoring three thermal zones: two external

and one internal. The external temperatures are measured via thermal diode inputs capable of

monitoring remote devices. In addition, they are equipped with an ambient temperature sensor for

measuring the internal temperature.

Pulse Width Modulators (PWM) control the speed of the fans by varying the output duty cycle of the

PWM. Each PWM can be associated with any or all of the thermal zones monitored. As the

temperature of the associated zone varies, the PWM duty cycle is adjusted accordingly. The Ramp

Rate Control feature controls the rate of change of the PWM output, thereby reducing system noise

created by changing the fan speed. The speed of each fan is monitored by a Fan Tachometer input.

The measured values are compared to values stored in Limit Registers to detect if a fan has stalled

or seized.

Fan speed may be under host software control or automatic. In host control mode, the host software

continuously monitors temperature and fan speed registers, makes decisions as to desired fan speed

and sets the PWM’s to drive the required fan speed. This device offers an interrupt output signal

(INT#), which may be used to interrupt the host on out-of-limit temperature or voltage condition

enabling an ACPI response as opposed to the host software continuously monitoring status. In auto

“zone” mode, the logic continuously monitors the temperature and fan speeds and adjusts speeds

without intervention from the host CPU. Fan speed is adjusted according to an algorithm using the

temperature measured in the selected zone, the high and low limits set by the user, and the current

fan speed.

Revision 0.4 (09-25-07)

8

DATASHEET

SMSC EMC6D102

Share Link: