CF2-B0-22-620-43G-D データシートの表示（PDF） - Unspecified

部品番号

コンポーネント説明

メーカー

CF2-B0-22-620-43G-D

CIRCUIT BREAKER

Unspecified 

6 | C-Series Circuit Breaker - Handle UL Recognized – Ordering Scheme

C

1

Series

A

2

Actuator

3

3

Poles

1 SERIES

C

B

4

Circuit

0

5

Aux/Alarm

Switch

10

6

Frequency

& Delay

2 ACTUATOR 1

A Handle, one per pole

B Handle, one per multipole unit

S Mid-Trip Handle, one per pole

T Mid-Trip Handle, one per pole & Alarm Switch

3 POLES 2

1 One

2 Two

3 Three

4 Four

5 Five

6 Six

4 CIRCUIT 3

A 3 Switch Only (No Coil)

B Series Trip (Current)

C Series Trip (Voltage)

D 4 Shunt Trip (Current)

E 4 Shunt Trip (Voltage)

F 4 Relay Trip (Current)

G 4 Relay Trip (Voltage)

H 4,5 Dual Coil with Shunt Trip

Voltage Coil

K 4,5 Dual Coil with Relay Trip

Voltage Coil

5 AUXILIARY / ALARM SWITCH

0 without Aux Switch

2 S.P.D.T., 0.110 Q.C. Term.

3 S.P.D.T., 0.139 Solder Lug

4 S.P.D.T., 0.110 Q.C. Term.

(Gold Contacts)

6 S.P.S.T., 0.139 Solder Lug

8 S.P.S.T., 0.187 Q.C. Term.

9 S.P.D.T., 0.187 Q.C. Term.

6 FREQUENCY & DELAY

03 3 DC 50/60Hz, Switch Only

10 7 DC Instantaneous

11 DC Ultra Short

12 DC Short

14 DC Medium

16 DC Long

20 7 50/60Hz Instantaneous

21 50/60Hz Ultra Short

22 50/60Hz Short

24 50/60Hz Medium

26 50/60Hz Long

30 DC 50/60Hz Instantaneous

31 DC 50/60Hz Ultra Short

32 DC 50/60Hz Short

34 DC 50/60Hz Medium

36 DC 50/60Hz Long

42 8 50/60Hz Short, Hi-Inrush

44 8 50/60Hz Medium, Hi-Inrush

46 8 50/60Hz Long, Hi-Inrush

52 8 DC Short, Hi-Inrush

54 8 DC Medium, Hi-Inrush

56 DC Long, Hi-Inrush

Notes:

1 Actuator Code:

A: Handle tie pin spacer(s) and retainers provided assembled with multi-pole units.

B: Handle location as viewed from front of breaker:

2 pole - left pole 3 pole - center pole 4 pole - two handles at center poles

5 pole - three handles at center poles 6 pole - four handles at center poles

S: Handle moves to mid-position only upon electrical trip of the breaker. Available

with circuit codes B, C, D, E, F, G, H and K.

T: Handle moves to mid-position and alarm switch activates only upon electrical trip

of the breaker. Available with circuit codes B & C.

2 Standard multipole units have all poles identical except when specifying auxiliary

switch and/or mixed poles. 4 pole max with VDE. 5th pole available as Series Trip with

Voltage Coil only.

3 Switch Only circuits, rated up to 50 amps and 6 poles, and only available with VDE

Certification when tied to a protected pole (Circuit Code B, C, D or H.). For .02 to

30 amps, select Current Code 630. For 35 - 50 amps, select Current Code 650.

For 55-70 amps, select Current Code 670. For 75-100 amps, select Current Code 810.

4 Circuit Codes D,E,F,G,H & K available with Terminal Codes 1,2,4 & 5 only. Circuit

Codes D, F, H & K available up to 50 amps maximum Current Rating.

5 Consult factory for available Dual Coil options, as special catalog number is

required. Dual Coil Voltage Coils with Shunt Trip Construction trip instantaneously

on line voltage. Dual Coil Voltage Coils require 30VA minimum power to trip

instantaneously and are rated for intermittent duty only.

6 Auxiliary Switch available with Series Trip and Switch Only circuits. On multi-pole

breakers, one auxiliary switch is supplied, mounted in the extreme right pole.

7 Voltage coils not rated for continuous duty. Available only with delay codes 10 & 20.

8 Available with Circuit Codes B & D only, and up to 50 amps maximum.

9 Current Ratings 60 - 70 are available up to four poles maximum. Ratings 71 - 100

are available up to two poles maximum.

10 Terminal Code 1 available to 60 amps maximum.

11 Terminal Codes 2, 4, 5 and C available to 50 amps maximum.

12 Terminal Codes 3, 6 & 9 available to 100 amps maximum.

13 Terminal Code 7 available to 25 amps maximum.

14 Terminal Code A available to 100 amps maximum.

15 Terminal Codes 7, 9 & C are not VDE approved.

16 No marking available. Consult factory. VDE/TUV Approval requires dual

(I-O, ON-OFF) or I-O markings on all handles.

17 Single pole only.

18 VDE/TUV: 30 amps max.; UL/CSA: 50 amps max.; Available in 2 - 4 poles only

and limited to AC Delays. “General Purpose amps” not rated for “full load amps” or

to be used in applications with a motor.

450

7

Current Rating

1

8

Terminal

2

9

Actuator

Color

1

10

Mounting

Bezel/Barrier

C

11

Agency

Approval

7 CURRENT RATING (AMPERES)

CODE AMPERES

020 0.020

235 0.350

430 3.000

025 0.025

240 0.400

435 3.500

030 0.030

245 0.450

440 4.000

035 0.035

250 0.500

445 4.500

040 0.040

255 0.550

450 5.000

045 0.045

260 0.600

455 5.500

050 0.050

265 0.650

460 6.000

055 0.055

270 0.700

465 6.500

060 0.060

275 0.750

470 7.000

065 0.065

280 0.800

475 7.500

070 0.070

285 0.850

480 8.000

075 0.075

290 0.900

485 8.500

080 0.080

295 0.950

490 9.000

085 0.085

410 1.000

495 9.500

090 0.090

512 1.250

610 10.000

095 0.095

415 1.500

710 10.500

210 0.100

517 1.750

611 11.000

215 0.150

420 2.000

711 11.500

220 0.200

522 2.250

612 12.000

225 0.250

425 2.500

712 12.500

230 0.300

527 2.750

613 13.000

OR VOLTAGE COIL (NORMAL RATED VOLTAGE) 7

CODE AMPERES

A06 6 DC

A32 32 DC

J12 12 AC

A12 12 DC

A48 48 DC

J18 18 AC

A18 18 DC

A65 65 DC

J24 24 AC

A24 24 DC

J06 6 AC

J48 48 AC

614 14.000

615 15.000

616 16.000

617 17.000

618 18.000

620 20.000

622 22.000

624 24.000

625 25.000

630 30.000

635 35.000

640 40.000

650

660

670

680

685

690

695

810

9

9

9

9

9

9

9

50.000

60.000

70.000

80.000

85.000

90.000

95.000

100.00

J65 65 AC

K20 120 AC

L40 240 AC

8 TERMINAL 15

1 10 Stud 10-32

2 11 Screw 10-32

3 12 Stud 1/4-20

4 11 Stud M5 x 0.8

5 11 Screw M5 x 0.8

6 12

7 13,15

9 15

A 14

C 11,15

Stud M6

0.250 Double Click Connect

7/16” Clip Terminal

Plug-In Stud

5/16” Clip Terminal

9 ACTUATOR COLOR & LEGEND 16

Actuator Color

I-O

ON-OFF

White

A

B

Black

C

D

Red

F

G

Green

H

J

Blue

K

L

Yellow

M

N

Gray

P

Q

Orange

R

S

Black (short handle)17 T

U

Dual

1

2

3

4

5

6

7

8

9

Legend Color

Black

White

White

White

White

Black

Black

Black

White

10 MOUNTING / BARRIERS

MOUNTING STYLE

BARRIERS

Threaded Insert

1 6-32 x 0.195 inches

no

A 6-32 X 0.195 inches

yes

C 18 6-32 X 0.195 inches

yes

2 ISO M3 x 5mm

no

B ISO M3 x 5mm

yes

D 18 ISO M3 x 5mm

yes

Front panel Snap-In, 1.00” [25.4mm] wide bezel

E 17 with Handleguard

no

VOLTAGE

< 300

< 300

≥ 300

< 300

< 300

≥ 300

< 300

11 AGENCY APPROVAL

C UL Recognized, CSA Accepted

D VDE Certified, UL Recognized, CSA Accepted

E TUV Certified, UL Recognized, CSA Accepted

H UL489 Construction: VDE Certified, UL Recognized, CSA Accepted

I UL Recognized STD 1077, UL Recognized 1500 (ignition protected),

CSA Accepted

L UL489 Construction: UL Recognized, CSA Accepted

R UL489 Construction: TUV Certified, UL Recognized, CSA Accepted

Email: sales@carlingtech.com Application Support: team2@carlingtech.com

Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com

Share Link: