MKP1O112203C00KSSD データシートの表示（PDF） - Unspecified
部品番号
コンポーネント説明
メーカー
MKP1O112203C00KSSD Datasheet PDF : 14 Pages
| |||
D
WIMA MKP 10
Polypropylene (PP) Capacitors for Pulse Applications with
Double-Sided Metallized Electrodes in PCM 7.5 mm to 52.5 mm. Capacitances
from 1000 pF to 47 mF. Rated Voltages from 100 VDC to 3000 VDC.
Special Features
Electrical Data
˜ Pulse duty construction
˜ Self-healing
˜ Very low dissipation factor
˜ Negative capacitance change
versus temperature
˜ According to RoHS 2011/65/EU
Typical Applications
For pulse applications e.g.
˜ Switch mode power supplies
˜ TV and monitor sets
˜ Lighting
˜ Audio/video equipment
Construction
Dielectric: Polypropylene (PP) film
Capacitor electrodes:
Double-sided metallized plastic film
Internal construction:
MKP 10: 63 VAC, 180 VAC, 250 VAC, 280 VAC
Plastic film
Electrode carrier
plastic film metallized
on both sides
Metal contact layer
(schoopage)
Terminating wire
MKP 10: 400 VAC, 600 VAC, 650 VAC, 700 VAC
Plastic film
Electrode carrier
plastic film metallized
on both sides
Plastic film metallized
on one side
Metal contact layer
(schoopage)
Terminating wire
MKP 10: 900 VAC (PCM 15 = 3-section)
Encapsulation:
Solvent-resistant, flame-retarPEdllaeacsttnircotdfipelmlcaarsriteirc
case with epoxy resin seal, UpolnLasbt9oict4hfilsmVid-em0setallized
Terminations: Tinned wire. Plastic film metallized
Marking: Colour: Red. on one side
Marking: Black.
Metal contact layer
(schoopage)
Terminating wire
Capacitance range:
1000 pF to 47 mF (E12-values on request)
Rated voltages: 100 VDC, 250 VDC, 400 VDC,
630 VDC, 850 VDC, 1000 VDC, 1250 VDC,
1600 VDC, 2000 VDC, 2500 VDC, 3000 VDC
Capacitance tolerances:
±20%, ±10%, ±5%
Operating temperature range:
–55) C to +100) C
Insulation resistance at +20+ C:
C T 0.33 mF: 1 x 105 M¸
C 0.33 mF: 30 000 sec (M¸ x mF)
Measuring voltage: 100 V/1 min.
Test voltage: 2 sec.
L 2000 VDC 2500 VDC 3000 VDC
41.5
41.5
57
1.6 Ur
1.4 Ur
1.2 Ur
1.4 Ur
1.4 Ur
1.2 Ur
1.2 Ur
1.2 Ur
1.2 Ur
Dissipation factors at + 20) C: tan d
Climatic test category:
55/100/56 in accordance with IEC
Dielectric absorption: 0.05 %
Voltage derating:
A voltage derating factor of 1.35 % per K
must be applied from +85+ C for DC
voltages and from +75+ C for AC
voltages.
Reliability:
Operational life 300 000 hours
Failure rate 1 fit (0.5 x Ur and 40) C)
Specific dissipation:
Box size* Specific dissipation in Watts per K
W x H x L in mm above the ambient temperature
35 x 50 x 57
0.132
45 x 55 x 57
0.164
45 x 65 x 57
0.184
* other box sizes see page 11.
at f
1 kHz
10 kHz
100 kHz
C 0.1 mF
6 x 10-4
6 x 10-4
15 x 10-4
0.1 mF < C T 1.0 mF
6 x 10-4
6 x 10-4
–
C > 1.0 mF
6 x 10-4
–
–
Maximum pulse rise time for pulses equal to the rated voltage
Capacitance max. pulse rise time V/msec at TA < 40) C
pF/mF 100 VDC 250 VDC 400 VDC 630 VDC 850 VDC 1000 VDC 1250 VDC 1600 VDC 2000 VDC 2500 VDC 3000 VDC
1000 . .. 2200 1250 2300 2300 2300 3500 3500 7000 7000 11500 11500 –
3300 . .. 6800 1150 1500 1500 1500 3500 3500 7000 7000 11500 11500 –
0.01 ... 0.022 900 1400 1500 1500 2700 2700 3800 3800 4400 11500 –
0.033 ... 0.068 500 1000 1150 1400 2700 2700 2700 2700 2700 2700 2700
0.1 ... 0.22 250 650 650 1150 1800 1800 1800 1800 1800 1800 1800
0.33 ... 0.68 130 390 500 900 1150 1150 1150 1150 1150 1150 1150
1.0 ... 2.2 90 250 250 500 500 500 650 650 650 650 500
3.3 ... 4.7 65 100 130 190 230 230 330 330 – – –
6.8 ... 15 45 65 90 160 – – – – –
22 ... 47 30 45 45 – – – – – –
Mechanical Tests
Pull test on pins:
d T 0.8 l: 10 N in direction of pins
d > 0.8 l: 20 N in direction of pins
according to IEC 60068-2-21
Vibration: 6 hours at 10 ... 2000 Hz and
0.75 mm displacement amplitude or 10 g
in accordance with IEC 60068-2-6
Low air density: 1kPa = 10 mbar in
accordance with IEC 60068-2-13
Bump test: 4000 bumps at 390 m/sec2
in accordance with IEC 60068-2-29
Packing
Available taped and reeled up to and
including case size 15 x 26 x 31.5 /
PCM 27.5 mm.
Detailed taping information and graphs
at the end of the catalogue.
For further details and graphs please
refer to Technical Information.
65
Share Link: 