MKP1O112203C00KSSD データシートの表示（PDF） - Unspecified

部品番号

コンポーネント説明

メーカー

MKP1O112203C00KSSD

Polypropylene (PP) Capacitors for Pulse Applications with Double-Sided Metallized Electrodes in PCM 7.5 mm to 52.5 mm. Capacitances from 1000 pF to 47 mF. Rated Voltages from 100 VDC to 3000 VDC.

Unspecified 

D

Recommendation for Processing

and Application of

Through-Hole Capacitors

Soldering Process

Internal temperature of the capacitor must

be kept as follows:

Polyester:

preheating: Tmax. T125° C

soldering: Tmax. T135° C

Polypropylene: preheating: Tmax. T100° C

soldering: Tmax. T110° C

Single wave soldering

Soldering bath temperature: T P 260 ° C

Dwell time:

t P 5 sec

Double wave soldering

Soldering bath temperature: T P 260 ° C

Dwell time:

St P 5 sec

Due to different soldering processes and

heat requirements the graphs are to be

regarded as a recommendation only.

WIMA Quality and Environmental Philosophy

ISO 9001:2015 Certification

WIMA Environmental Policy

RoHS Compliance

ISO 9001:2015 is an international basic

standard of quality assurance systems

for all branches of industry. The approval

according to ISO 9001:2015 of our facto-

ries by the infaz (Institut für Auditierung und

Zertifizierung) certifies that organisation,

equipment and monitoring of quality assu-

rance in our factories correspond to inter-

nationally recognized standards.

WIMA WPCS

The WIMA Process Control System (WPCS)

is a quality surveillance and optimization

system developed by WIMA. WPCS is a

major part of the quality-oriented WIMA

production. Points of application during

production process:

” incoming material inspection

” metallization

” film inspection

” schoopage

” pre-healing

” pin attachment

” cast resin preparation/

encapsulation

” 100% final inspection

” Testing as per customer requirements

All WIMA capacitors, irrespective of

whether through-hole devices or SMD,

are made of environmentally friendly

materials. Neither during manufacture

nor in the product itself any toxic sub-

stances are used, e.g.

– Lead

– PCB

– CFC

– Hydrocarbon chloride

– Chromium 6+

– PBB/PBDE

– Arsenic

– Cadmium

– Mercury

– etc.

We merely use pure, recyclable materials

for packing our components, such as:

” carton

” cardboard

” adhesive tape made of paper

” polystyrene

We almost completely refrain from using

packing materials such as:

” adhesive tapes made of plastic

” metal clips

According to the RoHS Directive 2011/65/EU

certain hazardous substances like e.g. lead,

cadmium, mercury must not be used any

longer in electronic equipment as of July 1st,

2006. For the sake of the environment WIMA

has refraind from using such substances since

years already.

WIMA Kondensatoren sind bleifrei

konform RoHS 2011/65/EU

WIMA capacitors are lead free

in accordance with RoHS 2011/65/EU

Tape for lead-free WIMA capacitors

DIN EN ISO 14001:2004

WIMA’s environmental management has

been established in accordance with the

guidelines of DIN EN ISO 14001:2004 to

optimize the production processes with

regard to energy and resources.

15

Share Link: