WAVESURFER3022 データシートの表示（PDF） - Unspecified

部品番号

コンポーネント説明

メーカー

WAVESURFER3022

WaveSurfer 3000 Oscilloscopes 200 MHz – 750 MHz

Unspecified 

SPECIFICATIONS

Analog - Vertical

Bandwidth (@ 50Ω)

Rise time

Input Channels

Vertical Resolution

Sensitivity

DC Gain Accuracy

BW Limit

Maximum Input Voltage

Input Coupling

Input Impedance

Offset Range

Offset Accuracy

WaveSurfer 3022 WaveSurfer 3024 WaveSurfer 3034 WaveSurfer 3054 WaveSurfer 3074

200 MHz

350 MHz

500 MHz

1.75 ns typical

1 ns typical

800 ps typical

2

4

8-bits; up to 11-bits with enhanced resolution (ERES)

50 Ω: 1mV/div - 1 V/div; 1 MΩ: 1 mV/div - 10 V/div

±(1.5%) Full Scale, Offset at 0V, > 5mV/div; ±(2.5%) < 5 mV/div

20 MHz

20 MHz, 200 MHz

50 Ω: 5 Vrms, ±10 V Peak; 1 MΩ: 400 V max (DC + Peak AC ≤ 10 kHz)

50 Ω: DC, GND; 1 MΩ: AC, DC, GND

50 Ω ±2.0%, 1 MΩ ±2.0% || 16 pF

50 Ω: 1 mV - 19.8 mV: ±2 V, 20 mV - 100 mV: ±5 V, 102 mV - 198 mV: ±20 V, 200 mV - 1 V: ±50 V

1 MΩ: 1 mV - 19.8 mV: ±2 V, 20 mV - 100 mV: ±5 V, 102 mV - 198 mV: ±20 V, 200 mV - 1 V: ±50 V,

  1.02 V - 1.98 V: ±200 V, 2 V - 10 V: ±400 V

±(1.0% of offset value + 1.5%FS + 1 mV)

750 MHz

550 ps typical

Analog - Acquisition

Sample Rate (Single-shot)

Sample Rate (Repetitive)

Record Length

Acquisition Modes

Real Time Timebase Range

RIS Mode Timebase Range

Roll Mode Timebase Range

Timebase Accuracy

2 GS/s (4 GS/s interleaved)

50 GS/s

10 Mpts/ch (all channels)

Real Time, Roll, RIS (Random Interleaved Sampling),

Sequence (Segmented Memory up to 1,000 segments with 1μs minimum intersegment time)

2 ns/div - 50 s/div

1 ns/div - 50 s/div

2 ns/div - 10 ns/div

1 ns/div - 10 ns/div

Up to 50 s/div (roll mode is user selectable at ≥ 50 ms/div)

±10 ppm measured over > 1ms interval

Digital - Vertical and Acquisition (WS3K-MSO Option Only)

Input Channels

16 Digital Channels

Threshold Groupings

Pod 2: D15 - D8, Pod 1: D7 - D0

Threshold Selections

TTL(+1.4V), 5V CMOS (+2.5V), ECL (-1.3V) or User Defined

Maximum Input Voltage

±30V Peak

Threshold Accuracy

±(3% of threshold setting + 100mV)

Input Dynamic Range

±20V

Minimum Input Voltage Swing

500mVpp

Input Impedance (Flying Leads) 100 kΩ || 5 pF

Maximum Input Frequency

125 MHz

Sample Rate

500 MS/s

Record Length

10MS - 16 Channels

Minimum Detectable Pulse Width 4 ns

Channel-to-Channel Skew

± (1 digital sample interval)

User defined threshold range

±10V in 20mV steps

Trigger System

Modes

Sources

Coupling

Pre-trigger Delay

Post-trigger Delay

Hold-off

Internal Trigger Level Range

External Trigger Level Range

Trigger Types

Auto, Normal, Single, Stop

Any input channel, External, Ext/5, or line; slope and level unique to each source (except for line trigger)

DC, AC, HFREJ, LFREJ

0-100% of full scale

0-10,000 Divisions

10ns up to 20s or 1 to 100,000,000 events

±4.1 Divisions

Ext: ±610mV, Ext/5: ±3.05V

Edge, Width, Logic (Pattern), TV (NTSC, PAL, SECAM, HDTV - 720p, 1080i, 1080p), Runt, Slew Rate,

Interval (Signal or Pattern), Dropout, Qualified (State or Edge); External and Ext/5 support edge trigger only.

Measure, Zoom and Math Tools

Measurement Parameters

Up to 6 of the following parameters can be calculated at one time on any waveform: Amplitude, Area, Base, Delay,

Duty Cycle, Fall Time (90%–10%), Fall Time (80%–20%), Frequency, Maximum, Mean, Minimum, Overshoot+,

Overshoot-, Peak-Peak, Period, Phase, Rise Time (10%–90%), Rise Time (20%–80%), RMS, Skew, Standard

Deviation, Top, Width+, Width-. Statistics and histicons can be added to measurements. Measurements can be gated.

Zooming

Use front panel QuickZoom button, or use touch screen or mouse to draw a box around the zoom area.

Math Functions

Up to 2 of the following functions can be calculated at one time: Sum, Difference, Product, Ratio, Absolute Value,

Average, Derivative, Enhanced Resolution, Envelope, Floor, Integral, Invert, Reciprocal, Rescale, Roof, SinX/x, Square,

Square Root, Trend, Zoom and FFT (up to 1 Mpts with power spectrum output and rectangular, VonHann, and FlatTop

windows).

Probes

Standard Probes

Probing System

One PP019 (5mm) per channel

One PP020 (5mm) per channel

BNC and Teledyne LeCroy ProBus for Active voltage, current and differential probes

10

Share Link: