MHR0312SA507M20 データシートの表示（PDF） - Unspecified

部品番号

コンポーネント説明

メーカー

MHR0312SA507M20

High voltage reisistor

Unspecified 

MHR0312SA type

High voltage reisistor

9.4.5 When high voltage resistors are assembled in your products, be careful in handling

to avoid breaking lead wire. If high voltage resistors will be handled in following

condition, lead wire may be breaking.

Applying a load which exceeded specified value.

Bending or twisting many times.

Bending at sharp angle.

9.4.6 Do not bend the high voltage resisitors after mounting and soldering.

If subjected to mechanical stress, the high voltage resistor may become damage.

9.4.7 Please be careful in handling not to get dirty on the surface of HIGH VOLTAGE

RESISTOR. The dirty with ionic contents may be occurred resistance down at

hightemp/humidity condition.

!

10. Note

10.1 Please make sure that your product has been evaluated and confirmed against your

specifications when our product is mounted to your product.

10.2 Product catalogues are subject to change or our products in it may be discontinued

without advance notice.

10.3 This catalogue is for reference only and not an official product specification

document, therefore, please review and approve our official product specification

before ordering this product.

11

Jan 2019

Share Link: