MLC8050 データシートの表示（PDF） - Unspecified
部品番号
コンポーネント説明
メーカー
MLC8050 Datasheet PDF : 68 Pages
| |||
Features
3
________________________________________________________________________________
1.2 Features
1.2.1 Safety measures for the laser diode
To protect the connected laser diodes the MLC8xxx modules contain the following
protection circuits:
• Softstart when switching on the laser diode current
Protection against capacitive and inductive parasitic elements (switching peaks).
• Limit for the injection current in all operating modes
Protection against thermal destruction of the laser chip.
• Limit for the optical power in constant current (!) mode
Protection against thermal destruction of the mirrors caused by too high optical
power.
• Interruption control of the connection cable to the laser diode (interlock)
Protection against accidental operation.
• Electronic short-circuit switch for the laser diode
Protection against static discharge when touching the switched off laser.
• Separate on and off function for each module
Protection against operating errors.
• Control LED for activated laser current
Laser protection when laser radiation is switched on.
• Separate over-temperature protection for each module
Protection against thermal failure of the module.
• Mains filter
Protection against line transients.
• Line failure protection
In case of power failure or line damage the current module must explicitly be
switched on anew since it cannot be taken for granted that all components of the
measurement set-up are still working reliably.
• Key-operated power switch
Protection against unauthorized or accidental use.
• LabVIEW®- and LabWindows/CVI®-driver
For the PRO8000 (-4) / PRO800 Thorlabs supplies LabVIEW®- and LabWin-
dows/CVI®-drivers for MS Windows 32.
Please refer to our homepage for latest driver updates.
http://www.thorlabs.com
_____________________________________________________________________________________________________
© 2010 Thorlabs
Share Link: 