K9F1G08U0D データシートの表示（PDF） - Samsung
部品番号
コンポーネント説明
メーカー
K9F1G08U0D Datasheet PDF : 39 Pages
| |||
K9F1G08U0D
FLASH MEMORY
2.1 ABSOLUTE MAXIMUM RATINGS
Parameter
Symbol
Rating
Unit
VCC
-0.6 to + 4.6
Voltage on any pin relative to VSS
VIN
-0.6 to + 4.6
V
VI/O
-0.6 to Vcc + 0.3 (< 4.6V)
Temperature Under
Bias
K9F1G08X0D-SCB0
K9F1G08X0D-SIB0
TBIAS
-10 to +125
-40 to +125
°C
K9F1G08X0D-SCB0
Storage Temperature
TSTG
-65 to +150
°C
K9F1G08X0D-SIB0
Short Circuit Current
IOS
5
mA
Note :
1. Minimum DC voltage is -0.6V on input/output pins. During transitions, this level may undershoot to -2.0V for periods <30ns.
Maximum DC voltage on input/output pins is VCC+0.3V which, during transitions, may overshoot to VCC+2.0V for periods <20ns.
2. Permanent device damage may occur if ABSOLUTE MAXIMUM RATINGS are exceeded. Functional operation should be restricted to the conditions
as detailed in the operational sections of this data sheet. Exposure to absolute maximum rating conditions for extended periods may affect reliability.
2.2 RECOMMENDED OPERATING CONDITIONS
(Voltage reference to GND, K9F1G08X0D-SCB0 :TA=0 to 70°C, K9F1G08X0D-SIB0:TA=-40 to 85°C)
Parameter
Symbol
K9F1G08U0D(3.3V)
Unit
Min
Typ.
Max
Supply Voltage
VCC
2.7
3.3
3.6
V
Supply Voltage
VSS
0
0
0
V
2.3 DC AND OPERATING CHARACTERISTICS(Recommended operating conditions otherwise noted.)
Parameter
Symbol
Test Conditions
K9F1G08U0D(3.3V)
Unit
Min
Typ
Max
Operating
Current
Page Read with Serial
Access
Program
Erase
ICC1
ICC2
ICC3
tRC=30ns
CE=VIL, IOUT=0mA
-
-
-
20
35
mA
Stand-by Current(TTL)
ISB1 CE=VIH, WP=0V/VCC
-
-
1
Stand-by Current(CMOS)
ISB2 CE=VCC-0.2, WP=0V/VCC
-
10
50
Input Leakage Current
Output Leakage Current
ILI
VIN=0 to Vcc(max)
ILO
VOUT=0 to Vcc(max)
-
-
±10
µA
-
-
±10
Input High Voltage
VIH(1)
VCC
-
0.8xVcc
-
+0.3
Input Low Voltage, All inputs
Output High Voltage Level
VIL(1)
VOH
-
K9F1G08U0D :IOH=-400µA
-0.3
-
0.2XVcc V
2.4
-
-
Output Low Voltage Level
VOL K9F1G08U0D :IOL=2.1mA
-
-
0.4
Output Low Current(R/B)
IOL(R/B) K9F1G08U0D :VOL=0.4V
8
10
-
mA
Note : 1. VIL can undershoot to -0.4V and VIH can overshoot to VCC +0.4V for durations of 20 ns or less
2. Typical value is measured at Vcc=3.3V, TA=25°C. Not 100% tested.
Samsung Confidential
10
Share Link: 