K9F1G08U0B-P データシートの表示（PDF） - Samsung
部品番号
コンポーネント説明
メーカー
K9F1G08U0B-P Datasheet PDF : 36 Pages
| |||
K9F1G08U0B
FLASH MEMORY
ABSOLUTE MAXIMUM RATINGS
Rating
Parameter
Symbol
Unit
3.3V Device
VCC
-0.6 to + 4.6
Voltage on any pin relative to VSS
VIN
-0.6 to + 4.6
V
VI/O
-0.6 to Vcc + 0.3 (< 4.6V)
Temperature Under K9XXG08XXB-XCB0
Bias
K9XXG08XXB-XIB0
TBIAS
-10 to +125
-40 to +125
°C
Storage Tempera-
ture
K9XXG08XXB-XCB0
K9XXG08XXB-XIB0
TSTG
-65 to +150
°C
Short Circuit Current
IOS
5
mA
NOTE :
1. Minimum DC voltage is -0.6V on input/output pins. During transitions, this level may undershoot to -2.0V for periods <30ns.
Maximum DC voltage on input/output pins is VCC+0.3V which, during transitions, may overshoot to VCC+2.0V for periods <20ns.
2. Permanent device damage may occur if ABSOLUTE MAXIMUM RATINGS are exceeded. Functional operation should be restricted to the conditions
as detailed in the operational sections of this data sheet. Exposure to absolute maximum rating conditions for extended periods may affect reliability.
RECOMMENDED OPERATING CONDITIONS
(Voltage reference to GND, K9F1G08U0B-XCB0 :TA=0 to 70°C, K9F1G0808B-XIB0:TA=-40 to 85°C)
Parameter
Symbol
K9F1G08U0B(3.3V)
Unit
Min
Typ.
Max
Supply Voltage
VCC
2.7
3.3
3.6
V
Supply Voltage
VSS
0
0
0
V
DC AND OPERATING CHARACTERISTICS(Recommended operating conditions otherwise noted.)
Parameter
Symbol
Test Conditions
Operating
Current
Page Read
Serial Access
with
ICC1
tRC=25ns
CE=VIL, IOUT=0mA
Program
ICC2
-
Erase
ICC3
-
Stand-by Current(TTL)
ISB1 CE=VIH, WP=0V/VCC
Stand-by Current(CMOS)
ISB2 CE=VCC-0.2, WP=0V/VCC
Input Leakage Current
ILI VIN=0 to Vcc(max)
Output Leakage Current
ILO VOUT=0 to Vcc(max)
Input High Voltage
VIH(1)
-
Input Low Voltage, All inputs
Output High Voltage Level
Output Low Voltage Level
Output Low Current(R/B)
VIL(1)
-
VOH K9F1G08U0A :IOH=-400µA
VOL K9F1G08U0A :IOL=2.1mA
IOL(R/B) K9F1G08U0A :VOL=0.4V
K9F1G08U0B(3.3V)
Unit
Min
Typ
Max
-
15
30
mA
-
-
1
-
10
50
-
-
±10
µA
-
-
±10
0.8xVcc
-
VCC
+0.3
-0.3
-
0.2xVcc
V
2.4
-
-
-
-
0.4
8
10
-
mA
NOTE : 1. VIL can undershoot to -0.4V and VIH can overshoot to VCC +0.4V for durations of 20 ns or less.
2. Typical value is measured at Vcc=3.3V, TA=25°C. Not 100% tested.
8
Share Link: 