A72F06802602K データシートの表示（PDF） - KEMET
部品番号
コンポーネント説明
メーカー
A72F06802602K Datasheet PDF : 14 Pages
| |||
Single-sided
Metallized
Polypropylene
Film
Double-sided
Metallized
Polyester Carrier
Film
Polypropylene
Film Dielectric
Metallized
Polyester Carrier
Film
Film Capacitors
Polypropylene Pulse/High Frequency Capacitors – A72 Series Polypropylene Film/Foil, Axial
Soldering Process cont'd
1 Section
2 Sections
Single-sided
Metallized
Polypropylene
Film
Selective Soldering Recommendations
Polypropylene
Double-sided
Film Dielectric
SMinegtlael-lsiSzideeedldective dip solderingDisMoueabtalevll-aisziredidaedtion of
Polypropsyolelndeered is preheatedPaolnyedstterraCnasrprieorrted
Metallized
reflow soldering. In thPisolmyperotphyoledn,ethe pPrionlyteesdtecr iCrcaurriietrboard with through-hole components to be
over the solder bath aFsilminDnieolremctraicl flow soldeFirlming without touching the solder. WShinegnle-tshideedboard is
Filmover the bath, it is stoppedFailmnd pre-designed solder pots are lifted from the bath with molten solder only at the placePsoMolyefpttrahollpeizyelsedneelected
components, and pressed against the lower surface of the board to solder the components.
Film
The temperature profile for selective solderi3nSgeicstiosnims ilar to the double wave flow soldering outlined4inSethctisiondsocument, however, instead
of two baths, there is only one bath with a time from 3 to 10 seconds. In selective soldering, the risk of overheating is greater than
in double wave flow soldering, and great care must be taken so that the parts are not overheated.
Construction
ne
1 Section
Metallized Polyphenylene
Sulfide Film with
Vacuum-Evaporated
Aluminum Electrodes
Metal Foil
(Fourth Layer)
Polypropylene Film/Foil
Margin
Detailed Cross Section
Metal Contact
Layer
Margin
Metal Foil
Polypropylene
Film Dielectric
Lead
Metal Foil
Polyester Tape
Wrapping
Single-sided
Metallized
Polypropylene
Film
Polypropylene
Film Dielectric
Lead
Thermosetting
Resin End-Fill
Polypropylene Film
Metal Foil (First Layer)
1 Section (Second Layer)
2 Sections
Polypropylene Film
Margin
Metal Contact (Third Layer)
Thermosetting
Layer
Resin End-Fill
Polyester Tape
Wrapping
Winding Schemes
AXIAL - Polypropylene Film/Foil
Polypropylene
Film Dielectric
Single-sided
Metallized
Polypropylene
Film
Metal Foil
1 Section
Metal Foil
2 Sections
Polypropylene
Film Dielectric
AXIAL - Single-sided Metallized
Polyester Film
AXIAL - Double-sided
Metallized Polyester Film
Single-sided
Double-sided
Metallized
Metallized
© KEMET Electronics Corporation • P.O. Box 5928P•oFGlyielrmesetenrville, SC 29606 (8P6o4l)y9es6Ft3eil-rm6C3a0r0rie•rwww.kemet.com
Polypropylene
Film Dielectric
F3039_A72_AXIAL • 12/15/2014 9
Single-sided
Metallized
Share Link: 