F2CFS-T555-141 データシートの表示（PDF） - Unspecified

部品番号

コンポーネント説明

メーカー

F2CFS-T555-141

MOTOMAN Operating and Maintenance Instructions DK

Unspecified 

2

Safety-related duties of the owner

The owner of the positioner/component is responsible for the safety of the operating

staff! This person must make sure that:

 the operating instructions and the related documentation have been read by the

operating staff (the manufacturer recommends having this confirmed in writing by the

operating staff).

 the operating instructions are kept on hand.

 the system/component is operated, maintained and serviced only by qualified, trained

and instructed personnel.

 unauthorised persons cannot have access to the system/component.

 the necessary, appropriate and possibly prescribed personal protective equipment is

available for the operating and service personnel and used by them.

 all existing necessary and prescribed safety equipment is

installed and working.

 function tests of the safety equipment are performed at prescribed or, if not prescribed,

at appropriate regular intervals.

 the system/component is operated only in accordance with its intended use.

If you have any questions or problems, contact the service department of MOTOMAN

robotec GmbH at tel. no.: (0049) (0) 180 5762683

2.1 Requirement for operating personnel

2.1.1 General

The operating staff must not be under the influence of alcohol, drugs or similar

substances. The operating staff must not have a restricted field of vision or be restricted in

any other way that could lead to risks. The operating staff must be in a suitable state of health

to operate the system/component (in particular, attention must be paid to medical aids, such

as cardiac pacemakers etc.)

2.1.2 Qualified personnel:

Persons involved in the commissioning, operation, maintenance and repair of the

system/component must be familiar with the system/component and trained accordingly.

They must have read the operating manuals and understood them. Furthermore, they must

be instructed and must be able to avoid possible residual risks to themselves and third

persons while working on the system/component or to reduce such risks as far as possible.

To maintain the qualification, the safety instruction must be repeated at least every year.

8

MRD64092EN.5.I

Share Link: