FBR211NBD006-M データシートの表示（PDF） - Fuji Electric

部品番号

コンポーネント説明

メーカー

FBR211NBD006-M

MINIATURE RELAY 1 POLE—1 to 2 A (FOR SIGNAL SWITCHING)

Fuji Electric 

FBR211 SERIES

n SPECIFICATIONS

Item

Standard (A or B type)

High sensitive (C or E type)

Contact

Arrangement

1 form C (SPDT)

Material

Gold-overlay silver-palladium / gold-overlay silver

Resistance (initial)

Maximum 100 mΩ (at 0.1 A 6 VDC)

Rating (resistive)

0.5 A 120 VAC or 1 A 28 VDC

Maximum Carrying Current 2 A

Maximum Switching Power 60 VA or 28 W

Max. Switching Voltage*1

220 VAC or 150 VDC

Maximum Switching Current 1.25 A (AC) or 2 A (DC)

T

Minimum Switching load*2

Plastic sealed 1 mA, 1V

o

(reference)

Flux free 1 mA, 5V

Coil

Nominal Power (at 20°C)

Approximately 450 mW

Approximately 200 mW

b

Operate Power (at 20°C)

Approximately 315 mW maximum Approximately 140 mW maximum

e

Operating Temperature

–25°C to +55°C (no frost)

–25°C to +75°C (no frost)

Operating Humidity

45 to 85%RH

D Time Value Operate (at nominal voltage) Maximum 5 ms

i

Release (at nominal voltage) Maximum 5 ms

s Life

Mechanical

5 × 106 operations minimum

c

Electrical

o

(Refer to the REFERENCE DATA)

3 × 105 operations minimum (at 1 A/ 28 VDC resistive load)

1 × 105 operations minimum (at 2 A/ 12 VDC resistive load)

1 × 105 operations minimum (at 0.5 A/120 VDC resistive load)

n Other

Vibration Resistance

10 to 55 Hz (double amplitude of 1.5 mm)

t

SRheosicsktance Misoperation

100 m/s2 (11±1 ms)

i

Endurance

1,000 m/s2 (11±1 ms)

60 m/s2 (11±1 ms)

n

Weight

Approximately 4 g

u *1 If the switching voltage exceeds the rated contact voltage, reduce the current. The current values vary according to the type

of load.

e *2 Values when switching a resistive load at normal room temperature and humidity and in a clean environment. The minimum

d switching load varies with the switching frequency and operation environment.

n INSULATION

Item

Isolation (initial)

Dielectric

Strength

n SAFETY STANDARDS

Type

Compliance

UL

UL 110

E63615

CSA

C22.2 No. 14

LR 40304, LR 46016

Standard (A or B)

High sensitive (C or E)

Minimum 100 MΩ (at 500VDC)

500VAC 1 min. (standard)

1,500VAC 1 min. (high isolation coil and contact)

Contact rating

Flammability: UL 94-V0 (plastics)

0.5A, 120VAC (resistive)

1A, 28VDC (resistive)



Share Link: