VNI4140KTR-32(2012) データシートの表示（PDF） - STMicroelectronics
部品番号
コンポーネント説明
メーカー
VNI4140KTR-32 Datasheet PDF : 26 Pages
| |||
VNI4140K-32
Quad high side smart power solid state relay
Features
Type
VNI4140K-32
1. Per channel
Vdemag(1)
VCC-41 V
RDSon(1)
0.08 Ω
Iout(1) VCC
1 A 41 V
■ Output current: 1 A per channel
■ Shorted load protections
■ Junction overtemperature protection
■ Case overtemperature protection for thermal
independence of the channels
■ Thermal case shutdown restart not
simultaneous for the various channels
■ Protection against loss of ground
■ Current limitation
■ Undervoltage shutdown
■ Open drain diagnostic outputs
■ 3.3 V CMOS/TTL compatible inputs
■ Fast demagnetization of inductive loads
■ Conforms to IEC 61131-2
■ ESD according to IEC 61000-4-2 up to +/-
25 KV
Figure 1. Block diagram
Datasheet −production data
PowerSSO-24
Description
The VNI4140K-32 is a monolithic device made
using STMicroelectronics VIPower technology,
intended for driving four independent resistive,
capacitive or inductive loads with one side
connected to ground. Active current limitation
avoids the system power supply dropping in the
case of shorted load. Built-in thermal shutdown
protects the chip from overtemperature and short-
circuit. In overload condition, the channel turns
OFF and back ON automatically so as to maintain
junction temperature between TTSD and TR. If this
condition causes case temperature to reach
TCSD, the overloaded channel is turned OFF and
restarts only when case temperature has
decreased down to TCR. In the case of more than
one channel in overload, re-start of the
overloaded channels is not simultaneous, in order
to avoid high peak current from the supply. Non-
overloaded channels continue to operate
normally. The open drain diagnostic outputs
indicate overtemperature conditions.
March 2012
This is information on a product in full production.
Doc ID022576 Rev 3
1/26
www.st.com
26
Share Link: 