FTR-LY データシートの表示（PDF） - Fuji Electric
部品番号
コンポーネント説明
メーカー
FTR-LY Datasheet PDF : 8 Pages
| |||
FTRF-TKR1-LSYESREIREISES
n SPECIFICATION
Item
Contact Data
Configuration
Construction
Material
Resistance (initial)
Contact rating
Max. carrying current
Max. switching voltage
Max. switching power
Min. switching load *
Life
Mechanical
Electrical
Coil Data
Timing Data
Insulation
Other
Rated power
Operate power
Operating temperature range
Operate (at nominal voltage)
Release (at nominal voltage)
Resistance (initial)
Dielectric strength
Open contacts
Contacts to coil
Surge strength
Coil to contacts
Clearance
Creepage
EN61810-1, VDE0435 Voltage
Pollution degree
Material group
Category
Vibration resistance
Misoperation
Endurance
Shock
Misoperation
Endurance
Weight
Sealing
LY (C,R) A ( ) (Y,E,V)
LY (A,P) A ( ) (Y,E,V)
1 form C (SPDT)
1 form A (SPST-NO)
Single
Y: AgSnO2 / E: AgNi / V: AgSnO2 + Au 0.3μm
Y, E: Max. 100 mΩ at 6 VDC, 1 A
V: Max. 30 mΩ at 6 VDC, 1A
6A, 250VAC / 24VDC
6A
250VAC
1,500VA / 144W
Y, E: 100 mA 5 VDC
V: 10mA 5 VDC
Min. 10 x 106 operations
Min. 50 x 103 operations (N.O.)
Min. 30 x 103 operations (N.C.) at 6A, 250VAC / 30VDC
resistive
170 to 217 mW
74 to 76 mW
-40 °C to +85 °C (no frost)
Max. 8ms (no diode, without bounce)
Max. 4ms (no diode, without bounce)
Min. 1,000MΩ at 500VDC
1,000VAC (50/60Hz) 1min.,10mA detection current
4,000VAC (50/60Hz) 1min.,10mA detection current
6,000V / 1.2 x 50µs standard wave
8 mm
8 mm
250V
3
III a
C / 250V
10 to 55Hz double amplitude 1.0mm
10 to 55Hz double amplitude 1.5mm
Min. 50m/s² (11 ± 1ms) Min. 100m/s² (11 ± 1ms)
Min. 1,000m/s² (6 ± 1ms)
Approximately 5 g
Plastic sealed RTIII
* Minimum switching loads mentioned above are reference values. Please perform the confirmation test with actual
load before production since reference values may vary according to switching frequencies, environmental conditions
and expected reliability levels.
2
Share Link: 