ISL36111DRZ-TS データシートの表示（PDF） - Intersil
部品番号
コンポーネント説明
メーカー
ISL36111DRZ-TS Datasheet PDF : 8 Pages
| |||
ISL36111
Absolute Maximum Ratings
Supply Voltage (VDD to GND) . . . . . . . . . . . . -0.3V to 1.5V
Voltage at All Input Pins . . . . . . . . . . . . . . . . -0.3V to 1.5V
ESD Rating
High-Speed Pins . . . . . . . . . . . . . . . . . . . . . 1.5kV (HBM)
All Other Pins . . . . . . . . . . . . . . . . . . . . . . . . 2kV (HBM)
Thermal Information
Thermal Resistance (Typical)
θJA (°C/W) θJC (°C/W)
16 Ld QFN Package (Notes 4, 5) . . 56
10
Operating Ambient Temperature Range . . . . . . 0°C to +85°C
Storage Ambient Temperature Range . . . . -55°C to +150°C
Maximum Junction Temperature . . . . . . . . . . . . . . . +125°C
Pb-Free Reflow Profile . . . . . . . . . . . . . . . . . .see link below
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact
product reliability and result in failures not covered by warranty.
NOTE:
4. θJA measured in free air with the component mounted on a high effective thermal conductivity test board with “direct attach”
features. See Tech Brief TB379.
5. For θJC, the “case temp” location is the center of the exposed metal pad on the package underside.
Operating Conditions
PARAMETER
Supply Voltage
Operating Ambient Temperature
Bit Rate
SYMBOL
CONDITION
VDD
TA
NRZ data applied to any channel
MIN
1.1
0
2.5
TYP
1.2
25
MAX
1.3
85
11.1
UNITS
V
°C
Gb/s
Control Pin Characteristics VDD = 1.2V, TA = +25°C, and VIN = 600mVP-P, unless otherwise noted.
PARAMETER
SYMBOL
CONDITION
MIN TYP MAX
Output LOW Logic Level
Output HIGH Logic Level
Input Current
VOL LOSB
0
0
250
VOH LOSB
1000
VDD
Current draw on boost control pin, i.e., CP[A,B]
30
100
UNITS
mV
mV
µA
Electrical Specifications VDD = 1.2V, TA = +25°C, and VIN = 600mVP-P, unless otherwise noted.
PARAMETERS
SYMBOL
CONDITION
MIN TYP MAX
Supply Current
Cable Input Amplitude
Range
IDD
VIN Measured differentially at data source
600
before encountering channel loss; Up to
10m 28AWG standard twin-axial cable
(approx. -27dB @ 5GHz)
92
1600
DC Differential Input
Resistance
Measured on input channel IN[P,N]
80
100
120
DC Single-Ended Input
Resistance
Input Return Loss Limit
(Differential)
SDD11
Measured on input channel IN[P] or
IN[N], with respect to VDD.
100MHz to 4.1GHz
4.1GHz to 11.1GHz
40
50
60
Note 7
Note 8
Output Amplitude Range
VOUT Measured differentially at OUT[P] and
450
650
850
OUT[N] with 50Ω load on both output pins
Differential Output
Impedance
Measured on OUT[P,N]
80
105
120
Output Return Loss Limit
(Differential)
SDD22 100MHz to 4.1GHz
4.1GHz to 11.1GHz
Note 7
Note 8
Output Return Loss Limit
(Common Mode)
SCC22 100MHz to 2.5GHz
2.5GHz to 11.1GHz
Note 9
-3
Output Residual Jitter
10.3125Gbps; Up to 10m 28AWG
standard twin-axial cable (approx. -27dB
@ 5GHz)
0.35
UNITS NOTES
mA
mVP-P
6
Ω
Ω
dB
7
dB
8
mVP-P
Ω
dB
7
dB
8
dB
9
dB
10
UI
6, 11,
12
3
FN6974.0
November 19, 2009
Share Link: 