TRCV012G5 データシートの表示（PDF） - Agere -> LSI Corporation
部品番号
コンポーネント説明
メーカー
TRCV012G5
Agere -> LSI Corporation
TRCV012G5 Datasheet PDF : 28 Pages
| |||
Preliminary Data Sheet
August 2000
TRCV012G5 and TRCV012G7
Limiting Amplifier, Clock Recovery, 1:16 Data Demultiplexer
Pin Information (continued)
Table 3. Pin Descriptions—Global Signal
Pin
Symbol* Type† Level
Name/Description
116
RESETN
Iu CMOS Reset (Active-Low). Resets all synchronous logic. During
a reset, the true data outputs are in the low state and the
barred data outputs are in the high state.
0 = reset
1 or no connection = normal operation
* Differential pins are indicated by the P and N suffixes. For nondifferential pins, N at the end of the symbol name designates active-low.
† I = input, O = output. Iu = an internal pull-up resistor on this pin, Id = an internal pull-down resistor on this pin, It = an internal termination resis-
tance of 50 Ω on this pin.
Table 4. Pin Descriptions—Power and No-Connect Signals
Note: VCCA, VCCLA, and VCCD have the same dc value, which is represented as VCC unless otherwise specified.
However, high-frequency filtering is suggested between the individual supplies.
Pin
9, 10, 22, 23
24, 27, 35
8, 42, 45, 48,
56, 59, 71, 76,
81, 89, 94, 99,
106, 109, 112,
127
13, 15, 20, 21
29, 31, 33
1, 7, 36, 38,
39, 49, 52, 55,
64—68, 86,
102, 103, 128
11, 12, 14, 126
Symbol*
VCCA
VCCLA
VCCD
GND
NC
Type†
I
I
I
Level
Power
Power
Power
Name/Description
Analog Power Supply (3.3 V).
Limiting Amplifier Power Supply (3.3 V).
Digital Power Supply (3.3 V).
I Ground Ground.
No Connection. These pins must be left open.
* Differential pins are indicated by the P and N suffixes. For nondifferential pins, N at the end of the symbol name designates active-low.
† I = input, O = output. Iu = an internal pull-up resistor on this pin, Id = an internal pull-down resistor on this pin, It = an internal termination resis-
tance of 50 Ω on this pin.
Lucent Technologies Inc.
9
Share Link: