ATASTK512-EK3-AUT データシートの表示（PDF） - Atmel Corporation

部品番号

コンポーネント説明

メーカー

ATASTK512-EK3-AUT

AVR-based Uni-directional Radio Starter Kit Featuring Secure Rolling-Code RF Transmission Encryption User Guide

Atmel Corporation 

Section 2

Getting Started

This section contains the steps required to get a simple system with a receiver and two transmitters up

and running. Hardware assembly, initial programming of the components, teaching the transmitters to

the receiver, and demonstrating the transmission protocol are described in the following subsections.

2.1 Hardware Assembly

The kit hardware must be interfaced to the STK500.

Step A: Assemble the STK500 Board

The STK500 Board must be set up properly before mounting the STK512 Interface Board. The assem-

bled STK500 Board is shown in Figure 2-1.

Figure 2-1. STK500 Board with Ribbon Cables and Microcontroller

STK512 User Guide

2-1

5170C–AVR–10/09

Share Link: