MPZ2012S300A データシートの表示（PDF） - TDK Corporation

部品番号

コンポーネント説明

メーカー

MPZ2012S300A

Chip Beads(SMD) For Power Line

TDK Corporation 

(1/2)

Chip Beads(SMD)

For Power Line

Conformity to RoHS Directive

MPZ Series MPZ2012 Type

FEATURES

• The MPZ series are multilayer chip impeders for power supply

line applications.

• High miniaturized, these parts nonetheless exhibit low DC

resistance and high current handling capability.

• The products contain no lead and also support lead-free

soldering.

• It is a product conforming to RoHS directive.

APPLICATIONS

Removal of power line noises of cellular phones, PCs, note PCs,

TVs, TV tuners, STBs, audio players, DVDs, DSCs, DVCs, game

machines, digital photo frames, car navigation system, PNDs, etc.

SHAPES AND DIMENSIONS/RECOMMENDED PC BOARD

PATTERN

2.0±0.2

0.5±0.3

0.8 1 0.8

Weight: 8mg

Dimensions in mm

TEMPERATURE RANGES

Operating/storage

–55 to +125°C

PRODUCT IDENTIFICATION

MPZ 2012 S 331 A T

(1) (2) (3) (4) (5) (6)

PACKAGING STYLE AND QUANTITIES

Packaging style

Taping

Quantity

4000 pieces/reel

(1)Series name

(2)Dimensions L× W

(3)Material code

(4)Nominal impedance

331: 330Ω at 100MHz

(5)Characteristic type

(6)Packaging style

T: Taping

HANDLING AND PRECAUTIONS

• Before soldering, be sure to preheat components. The preheat-

ing temperature should be set so that the temperature difference

between the solder temperature and product temperature does

not exceed 150°C.

• After mounting components onto the printed circuit board, do not

apply stress through board bending or mishandling.

• Do not expose the inductors to stray magnetic fields.

• Avoid static electricity discharge during handling.

• When hand soldering, apply the soldering iron to the printed cir-

cuit board only. Temperature of the iron tip should not exceed

350°C. Soldering time should not exceed 3 seconds.

RECOMMENDED SOLDERING CONDITION

REFLOW SOLDERING

250 to 260˚C

230˚C

10s max.

Natural

cooling

180˚C

150˚C

Preheating

60 to 120s

Time(s)

Soldering

30 to 60s

• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific

bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.

• Please contact our Sales office when your application are considered the following:

The device’s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.)

• All specifications are subject to change without notice.

007-01 / 20090910 / e9413_mpz.fm

Share Link: