MKT1813510255 データシートの表示（PDF） - Vishay Semiconductors

部品番号

コンポーネント説明

メーカー

MKT1813510255

DC Film Capacitors MKT Axial Type

Vishay Semiconductors 

www.vishay.com

MKT1813

Vishay Roederstein

RECOMMENDED PACKAGING

PACKAGING CODE TYPE OF PACKAGING REEL DIAMETER (mm) ORDERING CODE EXAMPLES

G

Ammo

-

MKT1813-422-014-G

x

R

Reel

350

MKT1813-422-014-R

x

-

Bulk

-

MKT1813-422-014

x

Note

• Attention: Capacitors with L > 31.5 mm only as bulk available

EXAMPLE OF ORDERING CODE

TYPE

CAPACITANCE CODE

MKT1813

410

VOLTAGE CODE

06

Note

(1) Tolerance codes: 4 = 5 % (J); 5 = 10 % (K); 6 = 20 % (M)

TOLERANCE CODE (1)

5

PACKAGING CODE

G

MOUNTING

Normal Use

The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for

mounting in printed-circuit boards by means of automatic insertion machines.

For detailed tape specifications refer to packaging information: www.vishay.com/doc?28139 or end of catalog.

Specific Method of Mounting to Withstand Vibration and Shock

In order to withstand vibration and shock tests, it must be ensured that the capacitor body is in good contact with the

printed-circuit board:

• For L  19 mm capacitors shall be mechanically fixed by the leads.

• For larger pitches the capacitors shall be mounted in the same way and the body clamped.

• The maximum diameter and length of the capacitors are specified in the “Dimensions” table.

• Eccentricity as shown in the drawing below.

Space Requirements on Printed-Circuit Board

The maximum length and width of film capacitors is shown in the drawing:

• Eccentricity as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned.

• Product height with seating plane as given by “IEC 60717” as reference: hmax.  h + 0.4 mm or hmax.  h' + 0.4 mm

1 mm

Storage Temperature

Tstg = - 25 °C to + 35 °C with RH maximum 75 % without condensation

Ratings and Characteristics Reference Conditions

Unless otherwise specified, all electrical values apply to an ambient temperature of 23 °C ± 1 °C, an atmospheric pressure of

86 kPa to 106 kPa and a relative humidity of 50 % ± 2 %.

For reference testing, a conditioning period shall be applied over 96 h ± 4 h by heating the products in a circulating air oven at

the rated temperature and a relative humidity not exceeding 20 %.

Revision: 04-Jul-13

6

Document Number: 26013

For technical questions, contact: dc-film@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Share Link: