CYUSB3013 データシートの表示（PDF） - Cypress Semiconductor
部品番号
コンポーネント説明
メーカー
CYUSB3013 Datasheet PDF : 54 Pages
| |||
CYUSB301X/CYUSB201X
More Information
Cypress provides a wealth of data at www.cypress.com to help you to select the right <product> device for your design, and to help
you to quickly and effectively integrate the device into your design. For a comprehensive list of resources, see the knowledge base
article KBA87889, How to design with FX3/FX3S.
■ Overview: USB Portfolio, USB Roadmap
■ USB 3.0 Product Selectors: FX3, FX3S, CX3, HX3, West
Bridge Benicia
■ Application notes: Cypress offers a large number of USB appli-
cation notes covering a broad range of topics, from basic to
advanced level. Recommended application notes for getting
started with FX3 are:
❐ AN75705 - Getting Started with EZ-USB FX3
❐ AN76405 - EZ-USB FX3 Boot Options
❐ AN70707 - EZ-USB FX3/FX3S Hardware Design Guidelines
and Schematic Checklist
❐ AN65974 - Designing with the EZ-USB FX3 Slave FIFO In-
terface
❐ AN75779 - How to Implement an Image Sensor Interface with
EZ-USB FX3 in a USB Video Class (UVC) Framework
❐ AN86947 - Optimizing USB 3.0 Throughput with EZ-USB
FX3
❐ AN84868 - Configuring an FPGA over USB Using Cypress
EZ-USB FX3
❐ AN68829 - Slave FIFO Interface for EZ-USB FX3: 5-Bit Ad-
dress Mode
❐ AN73609 - EZ-USB FX2LP/ FX3 Developing Bulk-Loop Ex-
ample on Linux
❐ AN77960 - Introduction to EZ-USB FX3 High-Speed USB
Host Controller
❐ AN76348 - Differences in Implementation of EZ-USB FX2LP
and EZ-USB FX3 Applications
❐ AN89661 - USB RAID 1 Disk Design Using EZ-USB FX3S
■ Code Examples: < Modify as required >
❐ USB Hi-Speed
❐ USB Full-Speed
❐ USB SuperSpeed
■ Technical Reference Manual (TRM):
❐ EZ-USB FX3 Technical Reference Manual
■ Development Kits:
❐ CYUSB3KIT-003, EZ-USB FX3 SuperSpeed Explorer Kit
❐ CYUSB3KIT-001, EZ-USB FX3 Development Kit
■ Models: IBIS
EZ-USB FX3 Software Development Kit
Cypress delivers the complete software and firmware stack for FX3, in order to easily integrate SuperSpeed USB into any embedded
application. The Software Development Kit (SDK) comes with tools, drivers and application examples, which help accelerate appli-
cation development.
GPIF™ II Designer
The GPIF II Designer is a graphical software that allows designers to configure the GPIF II interface of the EZ-USB FX3 USB 3.0
Device Controller.
The tool allows users the ability to select from one of five Cypress supplied interfaces, or choose to create their own GPIF II interface
from scratch. Cypress has supplied industry standard interfaces such as Asynchronous and Synchronous Slave FIFO, Asynchronous
and Synchronous SRAM, and Asynchronous SRAM. Designers who already have one of these pre-defined interfaces in their system
can simply select the interface of choice, choose from a set of standard parameters such as bus width (x8, 16, x32) endianess, clock
settings, and compile the interface. The tool has a streamlined three step GPIF interface development process for users who need a
customized interface. Users are able to first select their pin configuration and standard parameters. Secondly, they can design a virtual
state machine using configurable actions. Finally, users can view output timing to verify that it matches the expected timing. Once the
three step process is complete, the interface can be compiled and integrated with FX3.
Document Number: 001-52136 Rev. *U
Page 3 of 54
Share Link: 