VJD2UXHB-AXS63-163-XLU1 データシートの表示（PDF） - Unspecified

部品番号

コンポーネント説明

メーカー

VJD2UXHB-AXS63-163-XLU1

CONTURA II, III SWITCHES

Unspecified 

4 | V–Series Contura Sealed Rocker Switches - General Specifications

Electrical

Contact Rating

.4VA @ 24VDC (MAX) resistive

15 amps, 125VAC

10 amps, 250VAC

1/2 HP 125-250VAC

20 amps, 4-14VDC

15 amps, 15-28VDC

10A, 14VT

6A, 125VAC L

Dielectric Strength

1500 Volts RMS

Insulation Resistance 50 Megohms

Initial Contact Resistance 10 milliohms max. @ 4VDC

Life

50,000 - 100,000 cycles circuit

dependent

Contacts

Silver alloy, silver tin-oxide, fine

silver

Terminals

Brass or copper/silver plate 1/4”

(6.3mm) Quick Connect

terminations standard. Solder lug,

Wire Lead

Mechanical

Endurance

150,000 cycles minimum

circuit dependent

Physical

Lighted

Incandescent - rated 10,000

hours Neon - rated 25,000 hours

LED - rated 100,000 hours 1/2 life

(LED is internally ballasted for

voltages to 24VDC)

Seals

Internal

Optional external gasket panel seal

Base

Polyester blend rated to 125°C with

a UL flammability rating of 94V0.

Contura II,III,IV,V,

Hard Surface: Basic actuator

VI, VII Actuator

structure molded of thermoplastic

polycarbonate with a hard Nylon 66

thermoplastic surface overlay.

Soft Surface: Basic actuator structure

molded of thermoplastic polycarbonate

with an elastomer overlay.

Contura X,XI,XII Actuator,VP Nylon 66 Reinforced rated to 105°C

Lens

Polycarbonate rated at 100°C

Contura XIV

Polycarbonate lens/sub-rocker with

ABS shell

Actuator Travel (Angular Displacement)

2 position

18°

3 positions

9° from center

Agency Certifications

Environmental

Sealing

Corrosion

Operating Temp.

Vibration 1

Vibration 2

Shock

Salt Spray

Dust

Thermal Shock

Moisture Resistance

Ignition Protection

Sealed version: IP66/68, this rating

applies to front panel components of

the actual switch only, and signifies

complete protection against dust as

well as powerful jets of water.

Mixed Flowing Gas (MFG) Class III

3 year accelerated exposure per

ASTM B-827, B-845 Silver and gold

contacts

-40°C to +85°C

Per Mil-Std 202F, Method 204D

Test Condition A 0.06 DA or 10G’s

10-500 Hz. Tested with VCH connector.

Test criteria - No loss of circuit during

test, pre and post test contact

resistance.

Resonance search

24-50 Hz 0.40 DA

50-2000 Hz ±10 G’s peak

Horizontal Axis 3-5 G’s max.

Random

24 Hz 0.06 PSD-Gsq/Hz

60 Hz 0.50

100 Hz 0.50

200 Hz 0.025

2000 Hz 0.025

No loss of circuit during test; <10μ

seconds chatter.

Per Mil-Std 202F, Method 213B, Test

Condition K @ 30G’s. Tested with

VCH connector. Test criteria - No loss

of circuit during test, pre and post

test contact resistance.

Per Mil-Std 202F, Method 101D, Test

Condition A, 96 Hrs. Sealed version only.

Mil STD 810, Method 510.2 Air Velocity

300 Ft/Min Duration 16Hr

Per Mil-Std 202F, Method 107F, Test

Cond. A, -55°C to +85°C. Test criteria -

pre and post test contact resistance

Per Mil-Std 202F, Method 106F, Test

Criteria - pre and post test contact

resistance

All Contura switches with sealed

construction meet the requirements

of UL1500/ISO8846 for ignition

protection, in addition to

conformance with EC directive

94/25/EC for marine products.

Mounting Specifications

Panel Thickness Range

.830[21.08]

Gaskets Acceptable Panel Thickness

0

.030 to .250 (.76 to 6.35mm)

TEST CUT

1

.030 to .109 & .147 to .157

1.450[36.83]

HOLE IN

ACTUAL

(.76 to 2.77mm & 3.73 to 3.98mm)

MATERIAL

Recommended: No gasket with panel

thickness of .032, .062, .093, .125,.187 or .250

SWITCH

MOUNTING HOLE

Email: sales@carlingtech.com Application Support: team2@carlingtech.com

Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com

Share Link: