IC1F-68RD-1.27SH(52) データシートの表示（PDF） - HIROSE ELECTRIC

部品番号

コンポーネント説明

メーカー

IC1F-68RD-1.27SH(52)

PC Card Socket Connector Complies with PC card Standard

HIROSE ELECTRIC 

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

PC Card Socket Connector Complies with PC card Standard

IC1 Series

sProduct Specifications

sFeatures

1. Compliant with PC Card Standards

Polarized entry prevents wrong insertion into a

corresponding connector. And sequential

contact engagement prevents electorostatic

discharge,avoiding possible damage to sensitive

board circuits.

2. Suited to Automatic Mounting

Packaged for a board placement with aoutmated

equipment.

3. Lead Offset

Available with several board termination

levels,to allow use of different height board

components.

In relation to the center line of connector,-

0.2mm,+0.3mm,+0.55mm,+0.9mm and

terminations on board center are available.

Ratings

Current rating 0.5 A

Operating temperature

Operating humidity

Voltage rating 125 V AC

-55ç to +85ç (Note 1)

95% R.H. max.

(No condensation)

Storage temperature -40ç to +70ç (Note 2)

Storage humidity

40% to 70% (Note 2)

Item

1. Insulation resistance

2. Withstanding voltage

3. Contact resistance

4. Vibration

Specification

1000Mø min.

No flashover or insulation breakdown.

40 mø max. (initial value) (Note 3)

No electrical discontinuity of 100ns or

more

Conditions

500 V DC

500 V AC / 1 minute

1 mA

Frequency: 10 to 2000 Hz, single amplitude of 1.52 mm or

acceleration of 147 m/s2(peak), 4 hours in each of the 3 directions.

5. Humidity (Steady state) Insulation resistance: 100 Mø min.

96 hours at temperature of 40ç and humidity of 90% to 95%

6. Temperature cycle

No damage, cracks, or parts looseness.

-55ç, 30 min /15 to 30ç, within 5 min/85ç, 30 min

/15 to 35ç, within 5 min, for 5 cycles

7. Durability

(Insertion/withdrawal)

8. Resistance to

soldering heat

Change of contact resistance from the

start should be 20 mø max.

No deformation of components

affecting performance.

10000 cycles at 400 to 600 cycles per hour

Reflow: At the recommended temperature profile

Manual soldering: 300ç for 3 seconds

Note 1: Includes temperature rise caused by current flow.

Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature

Range and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during

transportation.

sMaterials

Part

Insulator

Contact

Material

PPS

IC1K,IC1HA:Phosphor bronze

Others:Beryllium copper

Finish

Color : Black

Contact Area : gold plating

Lead Area : solder plating

Remarks

UL94V-0

-----------------

A73

Share Link: