THD15-2413N データシートの表示（PDF） - Unspecified

部品番号

コンポーネント説明

メーカー

THD15-2413N

DC/DC Converters

Unspecified 

DC/DC Converters

THD 15N Series 15 Watt

Input Specifications

Input current at no load (nominal input voltage)

12 Vin models: 8 mA typ.

24 Vin models: 5 mA typ.

48 Vin models: 4 mA typ.

Input current at full load (nominal input voltage)

12 Vin models: 1450 mA typ.

24 Vin models: 720 mA typ.

48 Vin models: 360 mA typ.

Start-up voltage /

under voltage shut down

12 Vin models: 9.0 VDC / 8.0 VDC

24 Vin models: 18 VDC / 16 VDC

48 Vin models: 36 VDC / 33 VDC

Surge voltage (1 sec. max.)

12 Vin models: 36 V max.

24 Vin models: 50 V max.

48 Vin models: 100 V max.

Conducted noise (input) EN 55022 level A, FCC part 15, level A

(without external components)

ESD (electrostatic discharge) EN 61000-4-2, air ±8 kV, contact ±6 kV,

perf. criteria A

Radiated immunity EN 61000-4-3 10 V/m, perf. criteriy A

Fast transient / Surge EN 61000-4-4, ±2 kV, perf. criteria A

EN 61000-4-5, ±2 kV perf. criteria A

with external input capacitor e.g. Nippon

chemi-con KY 220 µF, 100 V, ESR 48 mOhm

Conducted immunity EN 61000-4-6, 10 Vrms, perf. criteria A

Reflected ripple current 20 mAp-p typ.

Output Specifications

Voltage set accuracy ±1 % max

Regulation

– Input variation

single output models: 0.2 % max. (Vin min to Vin max.)

dual output models: 0.5 % max. (Vin min to Vin max.)

– Load variation 0 – 100%

single output models: 0.5 % max.

dual output models: 1.0 % max. balanced load

– Load variation 10 – 90%

single output models: 0.3 % max.

dual output models: 0.8 % max. balanced load

– Load cross regulation 25/100% 5.0 % max. (dual output models)

Minimum load 0 % of rated max. load

Temperature coefficient ±0.02 %/K

Ripple and noise (20 MHz bandwidth) 60 mVp-p typ.

Output current limitation at 150 % of Iout max. foldback

Short circuit protection indefinite, automatic recovery

Over voltage protection (single output models only)

3.3 VDC models:

5.1 VDC models:

12 VDC models:

15 VDC models:

3.9 VDC

6.2 VDC

15 VDC

18 VDC

Start up time (nominal Vin and constant resistive load) 30 ms typ. (for power on and remote on)

Transient response setting time (25% load step change) 250 µs typ.

Capacitive load

3.3 VDC models: 4700 µF max.

5.1 VDC models: 3300 µF max.

12 VDC models: 600 µF max.

15 VDC models: 400 µF max.

±5 VDC models: ±1500 µF max.

±12 VDC models: ±288 µF max.

±15 VDC models: ±200 µF max.

All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.

http://www.tracopower.com

Page 2 of 3

Share Link: