TRW データシートの表示（PDF） - Unspecified

部品番号

コンポーネント説明

メーカー

TRW

Wireless High Frequency Transceiver Module (RF GFSK)

Unspecified 

5 Configuration and Operation Modes

TRW-24G 2.4Ghz module has three modes, Active, Configuration and Stand by; which depends

on the setting of signal CE and CS. The following Table details the setting.

Mode

CE

CS

Active (RX/TX)

1

0

Configuration

0

1

Stand by

0

0

Device allows user to have two communication models in Active mode – Direct Mode and

ShockBurst to transmit and receive data from remote parties. It depends on the content of

configuration to set up the working models.

Configuration Mode allows user to setup the following settings:

1. Communication Mode : Direct Mode

ShockBurst Mode

2. Transmit power

3. Frequency selection for Channel 1 & 2

4. Data Rate

5. One / Two receiving simultaneously

Stand-by mode is used t o minimize average c urrent cons umption while maintaining short start up

times. The configuration word content is maintained during stand by.

The following introduction shall commence from configuration setting

http://www.wenshing.com.tw ; http://www.rf.net.tw

TRW-24G Datasheet P.7

Share Link: