R5F103A6ANA-W0 データシートの表示（PDF） - Renesas Electronics

部品番号

コンポーネント説明

メーカー

R5F103A6ANA-W0

RENESAS MCU True Low Power Platform (as low as 63 μA/MHz), 1.8V to 5.5V operation, 2 to 16 Kbyte Flash, 31 DMIPS at 24MHz, for General Purpose Applications

Renesas Electronics 

Datasheet

RL78/G12

RENESAS MCU

True Low Power Platform (as low as 63 μA/MHz), 1.8V to 5.5V operation,

2 to 16 Kbyte Flash, 31 DMIPS at 24MHz, for General Purpose Applications

R01DS0193EJ0200

Rev.2.00

Sep 06, 2013

1. OUTLINE

<R> 1.1 Features

Ultra-Low Power Technology

• 1.8 V to 5.5 V operation from a single supply

• Stop (RAM retained): 0.23 µA, (LVD enabled): 0.31 µA

• Snooze: 0.7 mA (UART), 1.20 mA (ADC)

• Operating: 63 µA /MHz

16-bit RL78 CPU Core

• Delivers 31 DMIPS at maximum operating frequency

of 24 MHz

• Instruction Execution: 86 % of instructions can be

executed in 1 to 2 clock cycles

• CISC Architecture (Harvard) with 3-stage pipeline

• Multiply Signed & Unsigned: 16 x 16 to 32-bit result in

1 clock cycle

• MAC: 16 x 16 to 32-bit result in 2 clock cycles

• 16-bit barrel shifter for shift & rotate in 1 clock cycle

• 1-wire on-chip debug function

Main Flash Memory

• Density: 2 KB to 16 KB

• Block size: 1 KB

• On-chip single voltage flash memory with protection

from block erase/writing

Data Memory Access (DMA) Controller

• Up to 2 fully programmable channels

• Transfer unit: 8- or 16-bit

Multiple Communication Interfaces

• Up to 3 x I2C master

• Up to 1 x I2C multi-master

• Up to 3 x CSI/SPI (7-, 8-bit)

• Up to 3 x UART (7-, 8-, 9-bit)

Extended-Function Timers

• Multi-function 16-bit timers: Up to 8 channels

• Interval Timer: 12-bit, 1 channel

• 15 kHz watchdog timer : 1 channel (window function)

Rich Analog

• ADC: Up to 11 channels, 10-bit resolution, 2.1 µs

conversion time

• Supports 1.8 V to 5.5 V

• Internal voltage reference (1.45 V)

• On-chip temperature sensor

Data Flash Memory

• Data Flash with background operation

• Data flash size: 2 KB size options

• Erase Cycles: 1 Million (typ.)

• Erase/programming voltage: 1.8 V to 5.5 V

RAM

• 256 B to 1.5 KB size options

• Supports operands or instructions

• Back-up retention in all modes

High-speed Oscillator Oscillator

• 24MHz with +/- 1% accuracy over voltage (1.8 V to

5.5 V) and temperature (-20 °C to 85 °C)

• Pre-configured settings: 24 MHz, 16 MHz, 12 MHz,

8 MHz, 6 MHz, 4 MHz, 3 MHz, 2 MHz, and 1 MHz

Safety Features (IEC or UL 60730 compliance)

• Flash memory CRC calculation

• RAM parity error check

• RAM write protection

• SFR write protection

• Illegal memory access detection

• Clock stop/ frequency detection

• ADC self-test

General Purpose I/O

• 5 V tolerant, high-current (up to 20 mA per pin)

• Open-Drain, Internal Pull-up support

Operating Ambient Temperature

• Standard: –40 °C to +85 °C

• Extended: –40 °C to +105 °C

Reset and Supply Management

• Power-on reset (POR) monitor/generator

• Low voltage detection (LVD) with 12 setting options

(Interrupt and/or reset function)

Package Type and Pin Count

• QFN: 24

• SSOP: 20, 30

* There is difference in specifications between every product.

Please refer to specification for details.

R01DS0193EJ0200 Rev.2.00

Sep 06, 2013

Page 1 of 106

Share Link: