502381 データシートの表示（PDF） - Molex Connectors

部品番号

コンポーネント説明

メーカー

502381

HAND CRIMP TOOL & Terminal Series

Molex Connectors 

Hand Crimp Tool For 1.25mm (.049") Pitch Crimp Terminals

LOCATOR

PUSHED THRU

TOOLING

LOCATOR

RELEASE

LOCATOR BUTTON

LOCATOR

BUTTON

PUSHED IN

TERMINAL

Figure 3

TERMINAL

4. Release the locator button, allowing the locator to return to the crimping

position.

5. Close the tool handle until the first ratchet position engages. See

Figure 4.

6. Insert the properly stripped wire through the terminal and against the

wire stop. See Figure 5.

7. Crimp the terminal by squeezing the tool handles until the ratchet

mechanism cycle has been completed. Release the handles to open

the jaws.

TOOLING

PARTIALLY

CLOSED

PARTIALLY

CLOSE HANDLE

OPEN

POSITION

TERMINAL

PRE-STRIPPED

WIRE

WIRE AGAINST

THE WIRE STOP

FIRST RATCHET

POSITION

Figure 4

WIRE STOP IS PART OF

THE LOCATOR

Figure 5

WIRE

TERMINAL

Note: The tamper proof ratchet action will not release the tool until it has been fully closed.

8. Remove the crimped terminal from the terminal locator by pulling on the wire.

9. Visually inspect the crimped terminal for proper crimp location.

Doc No: ATS-638194400 Release Date: 10-31-08

Revision: A

Revision Date: 10-31-08

UNCONTROLLED COPY

Page 3 of 7

Share Link: