BD2802GU-E2 データシートの表示（PDF） - ROHM Semiconductor
部品番号
コンポーネント説明
メーカー
BD2802GU-E2 Datasheet PDF : 28 Pages
| |||
System LED Drivers for Mobile phones
6LEDs
Illumination
BD2802GU
No.11041EAT12
●Description
The BD2802GU is a RGB LED driver specifically engineered for decoration purposes.This RGB driver incorporates lighting
patterns and illuminates without imposing any load on CPU.This RGB driver is best-suited for illumination using RGB LEDs
and decoration using monochrome LEDs.In addition, this RGB driver has been successfully miniaturized through the use of
a VCSP85H2 (2.8 mm 0.5 mm pitch) chip size package.
●Features
1) RGB LED driver (dual drivers)
- A slope control function is incorporated (allowing dual drivers to be controlled independently).
- Slope control can be implemented using the DC current.
- Two modes “continuous illumination mode” and “illumination single cycle mode” are supported.
- Independent external ON/OFF synchronizing terminals (of dual drivers) are provided.
- Multiple drivers can be used concurrently by using the I2C address change function and supporting reference clock I/O.
2) Thermal shutdown
3) I2C BUS fast mode support (maximum rate: 400 kHz)
- A device address can be changed via an external pin.
* This driver has not been designed for anti-radiation.
* This document may be altered without prior notice.
* This document does not provide for delivery.
●Absolute Maximum Ratings(Ta=25℃)
Parameter
Symbol
Limits
Unit
Maximum Applied voltage
Power Dissipation
VMAX
Pd
7
1250 (Note1)
V
mW
Operating Temperature Range
Topr
-40 ～ +85
℃
Storage Temperature Range
Tstg
-55 ～ +150
℃
(Note1)Power dissipation deleting is 10.0mW/ oC, when it’s used in over 25 oC.
(It’s deleting is on the board that is ROHM’s standard)
●Recommended Operating Conditions(VBAT≧VIO, Ta=-40～85℃)
Parameter
Symbol
Limits
Unit
VBAT input voltage
VBAT
2.7 ～ 5.5
V
VIO pin voltage
VIO
1.65 ～ 3.3
V
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
1/27
2011.04 - Rev.A
Share Link: 